Happy Friday!!! As promised, I’m back to share how I made this super cute mirror that I have on top of my DIY Floating Ledge!
Here’s how you can make one for your home!
I started with this mirror that I found at Target for about $19! They still have them but if you can’t find one, any mirror shape will do. You may need to adjust your measurements when you make your cuts, for your pallet, though!
I love the shape of the mirror itself but thought that it would be so pretty mounted on a stained pallet! I lucked out and found the scraps I needed in my garage! I cut 3 – 1×4′s at 25.5″ and 2 – 1×6′s at 25.5″.
Don’t have a saw? This hand saw is the perfect saw to get small jobs, like this pallet, done!
I used my good ole’ friend Kreg Jig to drill pocket holes into 4 of the boards.
And, I drilled 1 1/4″ pocket hole screws in the pocket holes with my Ryobi 18-volt Lithium drill.
Next, I gave my pallet one beautiful coat of my favorite Rust-Oleum Early American stain and let her dry for about an hour!