Submitted By: Matt MacLean
Original Shanty2Chic project it was inspired by:
https://www.shanty-2-chic.com/2014/05/restoration-hardware-inspired-dining-table-for-110.html
Time to Complete: 15-20 Hours
Total Cost: Materials In Northern Ontario, Canada $450.00
Finishing Details:
Two coats of Minwax Dark Walnut Oil based stain, with 220 grit sanding in between coats. After final coat of stain was dry, I sanded edges with 80 grit sand paper to give a distressed look. Also sanded table top lines where 1×6 connect with 220 grit only adding a little extra pressure to distress the lines a bit. I followed that with 3 coats of Clear Satin Polyurethane, with 220 grit sanding in between coats followed with a final Sanding/Buffing with a synthetic Finishing Pad.