Rustic industrial console table



Submitted By: Amy Park

Original Shanty2Chic project it was inspired by:
http://www.shanty-2-chic.com/2016/04/diy-industrial-cart-console-table.html

Project (URL):

Time to Complete: 1 weekend

Total Cost: $80

Finishing Details:
I shortened and lowered the height and width of this table to fit my space better. It is 48" long by 29 high and 14" deep. I also used 2×2 pieces I ripped from 2×6 lumber for all the edge pieces, instead of 2x4s as in the original plan. I found white plastic casters at Harbor Freight and spray painted them and the framing angles with oil rubbed bronze by Rust-Oleum. I skipped the dowels on the back, but may add them to the sides for additional flair in the future.