SIGN UP TO BECOME A VIP!

DIY Restoration Hardware Dining Table!

Oh HEY guys!  For those of you that follow us on Instagram, you have seen the progress of this baby I am sharing today.  I am in LOVE… With a table.  Not ashamed.

I loved my old dining set, but have always wanted to build one myself for my fam.  With 5 kiddos under the age of 11, we live a casual lifestyle, and I avoid cushions if at all possible.  Casual doesn’t have to be simple and boring though!  So, I enlisted the help of my sweet, furniture planning guru, Miss Ana White to help me come up with this BEAUTIFUL and beefy DIY farmhouse dining table…

DIY Dining Table

Dining Table DIY

Isn’t is the bomb??  Too legit to quit!  Restoration Hardware wants $3000 for it… I made it for $100 in wood.

I am going to share lots of tips and tricks on building this right here, and you can see the full set of free plans for the table on Ana’s site!

Let’s get started!

I knew I wanted this table to be big and beefy, so I was immediately drawn to using 4×4’s for the base.  These are beautiful and cheap at the same time.  There are some things you need to remember though.  Because of their thickness, some saws won’t be able to cut them.  A 12″ miter saw should do the trick perfectly.

Table Base Wood

I was so excited to finally get to bust open my Kreg HD JigDIY Restoration Hardware Dining Table!
I’ve actually had it staring at me in a box for months because I was too intimidated to open it up.  I avoid learning new things, and then once I see how easy they are, I want to hit myself for not doing them sooner.

So, basically the Kreg HD JigDIY Restoration Hardware Dining Table is a larger version of the Kreg Jig.  It’s perfect for working with big projects like this one, since you won’t be able to fit these 4×4’s into the Kreg Jig.  Here is what it looks like and how I clamped it on to my boards.

Kreg HD Jig

Kreg Jig HD

I used my Ryobi 18V drill to make the pocket holes.  These pocket holes are bigger and thicker than the ones made with the regular Kreg Jig.

I took lots of photos of where I put my pocket holes on the base because sometimes figuring out the best places to put them is the biggest battle.  You have lots of options, but here is where I decided to put mine…

I also used Gorilla Wood Glue between all of my joints!

gorilla_wood_glue

Kreg Jig Dining Table

This is a shot of the top of the base turned upside down on the ground.  I put the pocket holes where they would stay very hidden.

Pocket Holes on Table BaseAnd this is the bottom of the base…

Wood Dining Table How to

That is a shot of the 2×4 runners that will go just beneath the table top.

Now for the diagonal pieces… Sometimes these can be a booger to clamp.  In fact, I spent a good 10 minutes trying to hold one in place and then I finally had a light bulb moment and pulled out my Gorilla Tape.  That stuff worked like a charm!  I know it’s not the most beautiful clamping job, but hey… It held those pieces perfectly and cost a whole lot less than all of my clamps.  We will call this part Shanty Clamping 😉

Clamp Wood with Gorilla Tape

On this part, I just used 3″ wood screws through the diagonal pieces and into the straight pieces.  You can see where my screws are in these pics…

Table Base DIY

I used 4″ screws on this part and went through the bottom runner and into the diagonal part.

Don’t clamp.  Use the tape.  Trust me.

How to build a Dining Table

And finally the table top.  Oh the darn table top.  This is actually a breeze to put together with a Kreg Jig IF you can find nice boards.  I seriously made 4 trips to different hardware stores to find boards straight enough to work with.  I actually ended up settling on 10 footers just to get good boards that would work.  Oh well!

You can see how I put pocket holes up and down the boards to connect them.  I clearly didn’t measure at all on this part… Just used the old eyeball method!

Pocket Holes for Table Top

Because my wood was acting up a bit, you can see where I used multiple pocket holes on the breadboard… I won.  It’s not going anywhere now.

Table Top Kreg Jig

I attached the base of the table to the top by using 2 1/2″ wood screws through the 2×4 runners.  I also used a few 4″ screws through the 4×4 base just for added strength.

And now for the finish!  Woohoo!

I decided to match the finish of the table to the Restoration Hardware sideboard and hutch I made for my dining room HERE.

I used Rustoleum Ultimate Wood Stain in Dark Walnut!  You can find it at Lowe’s, but do know that the packaging has changed a bit.

Rust-Oleum-Dark-Walnut

This stuff is so great!  It only requires 1 coat and it dries in under an hour.  I have used many stains, and this brand is BY FAR my very favorite!

Once it dried, I put 2 coats of Rustoleum Ultimate Polyurethane in Satin on it to protect the finish.  This goes on white and dries clear.  It doesn’t stink and it dries fast!

Rustoleum_Polyurethane

That’s it for the finish!

I am in the middle of making the cutest benches to match this table.  I LOVE a dining table with benches for my family.  The kids can’t ruin them, and they are rustic and beautiful at the same time.  I knew I wanted to dress the table up a bit with some end chairs, so I went to my very favorite store to find those!

homegoods-logo2

HomeGoods Dining Chairs

I love them!  Ironically, they match my window panels I made perfectly.  It was a match made in dining room heaven… Or Homegoods!  Aren’t they perfect??

And here are a few more shots!

DIY Dining Table

Dining Table Wood

Pottery Barn Dining Table

Dining Table DIY

I hope you love it as much as I do!!

I would LOVE for you to share this and PIN it with your peeps below!

Thank you so much for stopping by, and let me know if you have any questions at all.  Thanks again 🙂

~Whitney

144 Comments

  1. Kathy Tabbers on July 17, 2019 at 9:00 pm

    I have seen a few different videos which said if you just use pocket holes the table top will crack because of the expansion and contraction of the long pieces. Have you had any problems with yours since you made it?

  2. William Santos on February 6, 2019 at 6:56 pm

    Does anyone have a link for the bench plans or cut list? I’m trying to figure out the dimensions. It looks to be just a smaller version of the table so it shouldn’t be too hard.

  3. Pat on December 8, 2018 at 9:35 pm

    I just looked on Ann’s site for these plans. They are still available. At her site under PLANS search for
    4 x 4 , and you will find them.

  4. Courtney on July 20, 2018 at 4:18 pm

    Would it make sense to pre-distress the table? We homeschool and work at the dining table most of the time; which means marks and scratches and dings are going to happen. Is there a way to make a table looked well loved before all the loving happens?

  5. Ashley on July 16, 2018 at 10:00 am

    Can you make this one more board width wider? Does that throw off all the other measurements? Is it long enough for 3 seats in each side also?

  6. Alexandra H on June 8, 2018 at 1:34 pm

    My husband and I are in the middle of building this table but we neglected to download the PDF file from Ana White’s page. Now when we go to click on it from your site it comes up as a missing page. Would you happen to have the ana white PDF file that you can e-mail to me so we can finish this project? Thank you!

  7. andrea on June 1, 2018 at 7:12 pm

    The link is no longer working for the plans, please update! Wanting to make this asap!

  8. James on May 31, 2018 at 4:48 pm

    What happened to Anna White’s link? It’s gone with all of the dimensions and instructions.

    • Kelsey on June 10, 2018 at 3:16 pm

      I’m looking for these plans too, and have not had any luck on Ana’s site! Please send them on if you have them. Thank you!

Leave a Comment