SIGN UP TO BECOME A VIP!

DIY Bathroom Mirror Storage Case

I am just slightly excited about this DIY Bathroom Mirror Storage Case I am sharing today.  Ok, just kidding.  I’m giddy!  I shared a little sneak peek on INSTAGRAM last week, and I am so happy to finally reveal the whole thing!  I have imagined it in my head, and the results are even better than I was hoping.  I have always wanted a full length mirror.  It makes checking out the final outfit before heading out the door so much easier than using the reflection of my glass shower door or my blank computer screen 😉  I thought it would be so great to add some function to this new mirror.  May as well kill two birds with one stone! I decided to build a big storage case behind the mirror to hold all my goodies and I am LOVING the results!  Here is how it turned out!

DIY Bathroom Storage Cabinet

DIY Bathroom Organization

How fun is that guys?  Who doesn’t love a some beautiful function in their bathroom?? I DO!  I will walk you through the entire build below, and you can also download the FREE printable plans HERE or by clicking the button below!

MY LATEST VIDEOS

DIY Bathroom Storage Cabinet Free Plans

Let’s get started!

DIY Bathroom Mirror Storage Case  – Supply List

2 – 1 x 6 x 8 pine or whitewood boards

4 – 1 x 4 x 8 pine or whitewood boards

1/4″ hardwood plywood cut to 19″ x 63″

Full Length beveled mirror (found at Home Depot)

3M Stainable Wood Filler

ScotchBlue Painter’s Tape

3M Advanced Abrasives 120 grit sanding paper

3m safety glasses

4 decorative hinges

1 pull or knob

magnet closures

wood stain of your color choice

I bought all the supplies and wood for this project for under $100.

DIY Bathroom Mirror Storage Case  – mirror door

I started by building out the mirrored door.  I used this great mirror I found at Home Depot for $25.  I love it because it is beveled and it’s also a great quality mirror.  It won’t give you the whole clown house distorted view when you look into it as some of the cheaper full length mirrors will.  This project is done off the specs of this mirror.  If you choose to use a different one, you will need to fix your measurements to fit it.

Home Depot Full Length Mirror

I started with my 1×4 hardwood plywood back.  I had the nice guys at Home Depot cut mine down for me.

How to make a bathroom organizer

Next, I cut my wood for the frame.  I used 1×4 pine boards for this part.  You can also use whitewood to save money, but make sure it is straight! Watch our How to Use a Miter Saw video HERE!

3m safety gear

Wood Bathroom Mirror

Next, I used my Kreg Jig to make 3/4″ pocket holes in each end of my 16″ pieces.

Kreg Jig K5

Wood Mirror Measurements

Check out our How to Use a Kreg Jig Video HERE

DIY Bathroom Mirror Storage Case  – Sanding

Before attaching all of my pieces I like to use a sanding pad to quickly remove the splinters on the edges.  This paper works great because I can keep it in my pocket and pull it out as I need it quickly… Perfect before attaching your boards!

3m abrasives sand paper

3m sanding paper

I attached my 16″ pieces to my 67″ pieces using 1.25″ pocket hole screws.

pocket hole screws for Kreg Jig

After attaching both ends, my frame looked like this…

Measurements for DIY Mirror Bathroom Case

Next, I added some wood glue to the frame and attached it down on my 1/4″ hardwood plywood.

How to add trim to mirror

I used my Ryobi cordless stapler to attach it from the back.

Ryobi AirStrike Stapler

After building out the door, I moved onto the frame of the case.

For this part, I used 1×6 pine boards.  I cut two pieces at  23 1/8″ and two pieces at 68 3/4″.  Again, I added 3/4″ pocket holes to my shorter boards.

frame measurements

I used my Kreg Right Angle Clamp to hold everything together while I attached it using 1.25″ pocket hole screws.

Kreg Right Angle Clamp

building a bathroom cabinet

Next, I added my top and bottom braces.   These were the same length as my shelf pieces, so I cut seven 1×4 pieces at 23 1/8″ each.

shelf pieces

 These will be used to attach the cabinet to the wall.  You can see here where I added pocket holes to these boards before I attached them.  This is a shot of the back.  These brace pieces will sit flush with the back of the cabinet.

back of bathroom cabinet

Now, it should look a bit like this…

Bathroom cabinet frame

DIY Bathroom Mirror Storage Case  – Time for the shelves!

I added 3/4″ pocket holes to each piece.  You can attach yours wherever you would like, but here is where I attached mine for your reference.

Shelf Placement

Before moving on, I filled all of my pocket holes with wood filler.

3M-Wood-Filler

I filled each hole and then used a scraper to flatten it out.

Scraper for Wood Putty

This wood filler is stainable, and I prefer using it over the plugs on holes like these.  This covers them well enough, and it’s also very easy to do.  Once the putty dries, I use the sanding pad to go back over it again.

Putty for pocket hole

That’s it for the build!

I stopped here and stained everything using Varathane stain from Home Depot in Dark Walnut.  I love this stuff!

After the stain completely dried, I attached my mirror to the door.  I used this mirror adhesive I found at Home Depot to attach it.  I just ran a thin bead on the back side of the mirror all around.  Then, I laid it on the door and used tape to hold everything in place.

Frame out a mirror

My final step was attaching it to the wall.  I used a stud finder to find my studs in the wall and marked on my frame where the studs would be.  I then used 3″ torx or wood screws to go through my braces and into the wall attaching to the stud.  I did pre drill before going through the brace pieces to keep the wood from splitting.

Hanging a bathroom shelf

I also added 2 to the bottom brace piece.

Hanging the bathroom shelf

I made sure everything was level before attaching the door…

Hanging the bathroom cabinet

To attach my door, I used two clamps to hold the door in place while I added my hinges.  I attached the hinges to the door first and then the frame.

clamp the mirror

DIY Bathroom Mirror Storage Case  – Hinges

How cute are these hinges I found at Home Depot!

Cute furniture hinge from Home Depot

My final step was adding some magnet closures and my pull to the front.  These just screw into place… Super easy!

magnet closure

pulls from home depot

And here she is all finished up!

DIY Bathroom Mirror Storage Case 

A little shot of the goodness inside…

Organize your rubberbands

I used 3m Command strip hooks to hold my rubber bands and also for my curling and flat iron below.

DIY Bathroom Organizer

And these are those great SnapWare containers I use in my pantry for this shelf!  These are great because they won’t break if they ever do get dropped.  5 kids… It could happen 😉

Bathroom Organizer

What do you think??

DIY Bathroom Storage

DIY Bathroom Storage Cabinet

I personally LOVE everything about it!  I finally have a full length mirror, and a ton of storage at the same time.  Can’t beat it!  I would LOVE for you to share and PIN my storage case with all your friends!

Happy Building!

More Posts Like This One

103 Comments

  1. Agen Poker Terbaik on November 13, 2018 at 9:48 pm

    What i do not understood is in truth how you are no longer really much more well-liked than you might be now.
    You’re very intelligent. You recognize thus significantly in the case of this subject, made me individually consider it from numerous
    varied angles. Its like men and women aren’t involved until it’s
    one thing to accomplish with Lady gaga! Your own stuffs excellent.
    At all times handle it up!

  2. June Rudolph on April 15, 2018 at 1:47 pm

    I loved the idea of this for my new master bathroom where I also have my washer and dryer. I used 1 x 8’s for the frame, 1 x 6’s for the shelves and added a 3/4 square dowel to the front of each shelf. My plan is to use the bottom shelf for laundry supplies.

  3. alan on March 25, 2018 at 11:27 am

    This cabinet was awesome, and my wife loves it too. I used your plans to build my very first wood project. I drew my shelves and hinge placement in auto cad so i had perfect placement and added an extra shelf. We wanted to make sure we had plenty of room. Thank you so much for sharing these plans.

  4. Rachael on January 28, 2018 at 10:15 am

    My hubby and I have been trying to figure something out for more storage in our small full bath. We have a house built in 1910 and the full bath was an add-on at some point. There is a huge unusable space between door frame and vanity. Vanity holds very little and NO linen closet anywhere. This would be perfect for items now crammed under vanity and make room for some linen space under there instead. Praying he’ll want to make this instead of buying something I’m not too fond of 🙂 thx for the inspiration and also soooo in love with the floating shelves as well.

  5. Verka on January 19, 2018 at 7:23 pm

    I do not see the location to purchase. Where am I to go?

  6. Campion Pry on July 2, 2017 at 10:04 am

    im sure you’ll build it yourself. I made it 2 weeks ago thanks to woodprix website.

  7. Jessica G Buchanan on September 6, 2016 at 8:43 pm

    I am unable to find the blog on the containers that you buy. Can you please help

Leave a Comment