DIY Full Length Mirror!

Learn how to build this DIY Full Length Mirror with free plans and tutorial by shanty2chic! This is a budget-friendly project that is perfect for beginners!

I have been itching to add some new mirrors to my dining room, and finally got around to it.  The idea came to me while I was working on my DIY jewelry cabinet.  The mirror I used for it was the perfect size for this project.  Here is how they turned out!

How cute are those?  These are really a simple build!  They are a perfect beginner Kreg Jig project as well!

Supply List for 3 Mirrors

6 – 1 x 4 x 6 whitewood or pine boards

6 – 1 x 2 x 8 whitewood or pine boards

1/4″ plywood or hardwood plywood ripped into 3 pieces (all 16″ x 55″)

Frameless Beveled Door Mirror from Target ($14.99 a piece)

Corner Brackets

I built each of my mirrors for under $40 a piece… Fits my budget perfectly! 🙂

I started by building each of the frames.  For these I used the 1×4 whitewood boards.  I used my saw to cut them to size.  Each mirror uses these 4 cuts to create the frame.

wood for mirror door
DIY Rustic Full Length Mirrors

I used my Kreg Jig to add pocket holes to my smaller pieces.  Both Ash and I use the K5 Kreg Jig 
model… For those of you considering purchasing one, this is the one I would get!  If you are currently using another model, I would totally add the K5 to your wish list.  It has some really great upgrades and features making it even easier and faster to use.

Kreg Jig K5

This is what your smaller boards should look like at this point…


Next, I used my Kreg driver bit (comes with the jig) to attach my short pieces to my long pieces using 1.25″ pocket hole screws.

pocket hole screws for Kreg Jig

Once I had all of my sides attached, it looked like this.

Frame for Mirror

I added wood glue to the back of the frames and placed the 1/4″ plywood pieces on top of each frame.  These are the measurements of the 1×4 pieces.  I had Home Depot cut mine for me to make is easier to get home.  It also saves me a step  ;-).  I chose to go slightly smaller on the width of the back so that I was able to get three backs from one sheet of 1/4″ plywood.

Mirror back measurements

I used my new, totally AMAZING Ryobi Airstrike Stapler to attach the wood to the frame using 3/4″ staples.  Yes… This is an 18 gauge stapler that is cordless people!  Go read the reviews for yourself… I love this tool!

Ryobi AirStrike Stapler

Now to frame them out!  I used the 1×2 for this part.  I started by adding my top and bottom pieces first.  I added a line of wood glue to each of these boards, and attached them using my nail gun.

Ryobi AirStrike Nail Gun

 These pieces are each 19″ long.

Trim piece for mirror

I added the longer pieces next.  These were all 56 1/2″ long.  You will see a 1/4″ gap under the frame from the plywood back.  I lined up the 1×2 pieces flush with the back of the plywood like you see in this pic!  I knew it would look better hanging on the wall.

mirror diy

Here it is after I nailed it down.

frame a mirror
mirror frame

That’s it for the build!  Before staining each frame, I used my Corner Cat sander to round out each of my corners and edges like this.  I also used my hammer to hit the wood and leave lots of dings on each of the frames.  I wanted these to look really ‘shanty’ 😉 !

Round edges with sander

Here they are ready for stain!

Frames for Mirrors

I chose to stain these babies with a new favorite color.  It’s a Varathane stain color called Carrington.  You can find this stain at Home Depot.  It dries in under an hour and only takes one coat… Woohoo!

Stained Mirrors

To attach my frames, I used mirror adhesive from Home Depot.  You can usually find this on the mirror aisle, or by the other adhesives.  It comes in a caulk canister.  I ran a continuous bead of it down my frames and attached the mirrors to them.

Mirror adhesive

My mirrors are ones I found in the store at Target.  It is the same mirror I used for my jewelry cabinet, and I have noticed since posting that project, the mirror can no longer be found online.  All of the stores around me carried lots of these though.  You can go with a different mirror.  You will just need to change up your wood cuts to match the size of your mirror.

I wanted to add a little something extra to these, so I found these corner braces at Home Depot.

metal decorative brackets

I sprayed all of them with a coat of Rust-Oleum canyon black spray paint.

Rustoleum Black spray paint

Then, I attached them to my frames!

Metal hardware for mirrors

My final step was hanging them up!  None of mine were going into studs, so I used my very favorite anchors for this part.  You guys will totally thank me for these when you get them.  They totally kick the other kind of anchors in the booty (just my honest and accurate opinion 😉 ), mainly because they are so easy to install!

Easy Drywall Anchors

These are self-drilling drywall anchors.  That means they require very little work on your end.  All you do is drive the plastic anchor in the wall first.

How to drywall anchors

Stop when the anchor is flush with the wall…

drywall screws

Now, drive in the screw…

How to attach a drywall anchor

I added a heavy-duty D ring to each of my mirrors and hung them from the screws on the wall.  I hung the D ring directly on the screw.  Easy!

d rings

Here they are all finished up!

How to make a full length mirror
DIY Wall Mirrors
Wall Mirrors DIY
DIY Full Length Mirror
DIY Rustic Full Length Mirrors
Full Length Mirror DIY
Full Length Mirrors DIY
Distressed Wood Finish
DIY Full Length Mirrors

Hope you love them as much as I do!  I think they much such a big impact on that wall when you first walk in the house.  Thanks so much again for stopping by!  Let us know if you have any questions at all.

I would LOVE for you to share and Pin this project with all your friends!

Here are the other projects I have done in this room!

DIY sideboard and hutch

Restoration Hardware inspired Sideboard and Hutch

DIY Dining Table

DIY Dining Table

Dining Table Bench DIY

DIY Dining Bench

Dining Room Panels

DIY Dining Room Panels


  1. townhomes memphis tn on December 18, 2020 at 6:04 pm

    1 star
    For hottest news you have to pay a quick visit world-wide-web and on the web I found
    this web site as a finest web site for most up-to-date updates.

  2. Ivory on November 23, 2020 at 11:40 am

    I love, love, and did I say love this project. Looks fabulous. Thanks for sharing

  3. Rhonda on September 13, 2019 at 7:38 pm

    What size nails did you use?

  4. Jody Lovett on May 8, 2019 at 9:39 am

    Are you going to post any printable plans for this project?

  5. Meg Erich on January 23, 2019 at 9:31 pm

    I know your post is a few years old now but still wondering if a question can be asked…

    How did you so evenly hang your mirrors?? There must be some kind of advice for that, hopefully!

  6. Susan on August 15, 2018 at 12:41 pm

    Love these wall mirrors. Would like to make them. where are the plans to print out for the mirrors? Best regards

    • Jody on May 8, 2019 at 10:15 am

      Were you able to get printable plans?

  7. Brenda on March 5, 2018 at 1:11 pm

    What’s the spray thing you have on top of the spray paint can?

  8. Brittany Thompson on January 25, 2018 at 7:50 am

    What is the size of the mirror? for these plans?

  9. Tricia Meier on June 4, 2017 at 4:41 pm

    What nail gun do you recommend to attach the frame pieces? Also what nail type and length should I use?

    • Shanty2Chic on June 5, 2017 at 7:20 am

      For this project I used Ryobi’s 18G brad nail gun with 1.25″ brad nails…. Hope that helps!

Leave a Comment