I am so happy with how this next project turned out! My hairdresser recently mentioned wanting a new coffee table. I quickly jumped at the opportunity for a little trade… I get my hair done and she gets a table… Perfect trade! 😉
Here is how it turned out!
How about those legs?? Big and beautiful, right? I’ll share details on where you can get them below!
I will give you guys the step by step on building this bad boy below, and you can also download and print the FREE PLANS for this table HERE or by clicking the button below!
When I planned the table in my head, I knew I wanted legs that really made a statement. The legs make this table! It’s such a simple build, but the overall look is so amazing! I worked with one of our VERY favorite companies to design these legs. Osborne Wood Products is so awesome. Their prices are great, and the variety is is too! You can find these legs HERE!
Let me show you how basic this build is. I started by making all of my cuts. I used my Ridgid Sliding Compound Miter Saw for all of mine.
Once all of my cuts were made, I started on my pocket holes. This table has lots, but using the Kreg Jig
on this table makes it super sturdy! You can see the K5 Kreg Jig that we use HERE on Amazon!
This plan calls for 3/4″ pocket holes since that is the thickness of the wood we are attaching to.
I started by building both of the planked tops. You can see how I lined my boards up in the Kreg Jig above. I used my Ryobi drill to create all of the pocket holes. Each of my 48″ pieces looked like this before attaching them. There are 2 of these boards that don’t require any pocket holes. They will be the planks on one end.
So, at this point you should have two planked pieces that look like this. I attached mine using 1 1/4″ pocket hole screws.
Below each of these pieces are frames. I built both of those next. They are also constructed the same, so you will build two of them as well. Each frame has 3 smaller boards, and 2 longer boards. Your shorter boards will have pocket holes that run all the way down each board and also pocket holes on each end. To create the pocket holes that ran down the length of each board, I placed them in the Kreg Jig like this…
The pocket holes on each end are made by lining the boards up like this…
I used 1 1/4″ screws and Gorilla wood glue to build both of the frames. These screws go through each of my end pocket holes and into the longer boards. When doing this, you want to make sure your pocket holes that run the length of the boards all face the same direction.
The next step is attaching those frames to the planked boards. This part is super easy because of those pocket holes! You just used 1 1/4″ pocket hole screws through all of those pocket holes and into the planked boards.
So, you will have 2 whole pieces that look like this now…
Time to build your little ‘L’ pieces! You can do this first, but I did wait and build them when I was ready to attach the legs. So, you are going to build 4 pieces that look like L’s. Each one uses 2 different pieces of 1×3. There will be a shorter piece, and a longer piece, and you can see here where your pocket holes on each piece will go.
Before attaching them to the table, you attach them together to form your L.
Then, they fit around the top of the legs and secure to the apron of the table top and the top of the table top using 1 1/4″ pocket hole screws, and then you also attach them directly to the legs using wood screws.
Here are all 4 legs attached before adding the other piece which is the bottom of the table.
To add the bottom piece, I put some Gorilla Wood Glue on each leg, and then used three 2.5″ wood screws through the bottom part and into each leg.
And voila… You have an upside down table!
My final step was staining. I used Rust-Oleum stain in a color called Wheat. Once it was dry, I used my Ryobi Corner Cat sander to distress all of my edges. I LOVE the look this achieves!
I also added a coat of polyurethane to the top to protect this finish. Here it is all finished up! I photographed it in my living room, and now I want to keep it there… 😉
The total cost in wood to build this was under $250. It is one of the more expensive coffee tables I have done, but compared to the thousands of dollars that certain stores are charging for similar looks, I am super pleased with the price. And those legs… You just can’t beat them!
I would LOVE for you to share and PIN this table with all of your friends! You guys are always so great about that, and we appreciate it SO MUCH!
Thanks so much for stopping by! Let me know if you have any questions at all!
And, thanks so much to Jay of Jay’s Custom Creations for putting all of Shanty 2 Chic’s original ideas into printable plans for our readers! You guys should check out his his site… He’s awesome!