SIGN UP TO BECOME A VIP!

DIY Farmhouse Coffee Cabinet

I am SO excited to share this piece with you today… It definitely has made my Top 5 builds yet!

I have a love for coffee.  LOVE.  I have been a Keurig owner for about a year now, which took my coffee love to an even bigger level, you hear me?  The only thing I don’t love about my Keurig is the amount of space it takes up on my countertop.  I decided it was time to give it a new home.  This is what I came up with!  Check out my new DIY Farmhouse Coffee Cabinet!

DIY Coffee Cabinet by Shanty2Chic

Ok, so although I am calling it a coffee cabinet, this baby can be used for just about anything!  It’s a great size and provides lots of storage.  The entire piece is very simple to build using a few tools.

As always, you can download the FREE PRINTABLE PLANS for this cabinet HERE, or by clicking the button below.  I will walk you through the whole build below as well!

Free Plans Coffee Cabinet

So, lets get started!  Just  a head’s up… I did assemble mine slightly differently than our plan calls for.  I added an extra piece of wood at the top to create a box.  It’s not necessary to do that, so we left it off the plans.  Either way will work!  Just let me know any questions. 🙂

The cabinet box and shelves are made with 3/4″ Purebond Plywood.  This can be found at Home Depot in 4′ x 8′ sheets.  For me, it’s impossible to get it home in the Suburban with the 5 kiddos, so I have the nice guys at Home Depot rip it down for me.  For this cabinet, I had them rip two cuts at 15 3/4″ and one cut at 15″.  You can see the diagram below to see what I mean…

rip cuts for coffee cabinet

This gave me three boards that are MUCH easier to load in the car.  When I got it home, I made all of the other cuts using my Ridgid Miter Saw, aka, my very best friend ever.

Ridgid Miter Saw

The first step is building the box of the cabinet.  This part uses the 15 3/4″ plywood.

To connect all of my pieces, I used my K5 Kreg Jig!  We get asked all the time which model of Kreg Jig we use.  Ash and I both used the K4 model for years and love it.  You can see that model HERE
.  We both recently upgraded to the awesome K5 model, which has some cool upgrades and features making it even faster and easier to use.  You can check out the K5 model HERE!

For this whole build, I used 3/4″ pocket holes and 1 1/4″ pocket hole screws.

Kreg Jig K5 Model

I put the box together like this below using 1 1/4″ pocket hole screws through all of the pocket holes I already made.  On our cut lists in the printable plans, anywhere you see an arrow on a piece of wood, that indicates a pocket hole.  Make sure to make all of your pocket holes before attaching anything!

You can see I have lined up the bottom shelf of the piece at 3.5″ from the bottom of my side pieces.

building cabinet

I used a line of Gorilla Wood Glue on each seem and held it all in place with my Kreg Right Angle Clamp.  I used my Ryobi drill to drive the 1.25″ pocket hole screws through the pocket holes and into the side pieces.

Kreg Right Angle Clamp

This is a picture of the top of the box.  I have it turned upside-down on the ground.  You can see the pocket holes I made here also attaching to the side pieces.  The top of the cabinet will be flush with the top of the two side pieces.

top of cabinet box

And bam… You have a box! 🙂

Building the Coffee Cabinet

Now, add the middle shelf!  Attach it with pocket hole screws through pocket holes and into the top and bottom of the box.

Box of Coffee Cabinet

Next, I added my bottom trim pieces.  I used a line of wood glue and my Ryobi AirStrike 18 gauge nail gun to attach the trim pieces.

Ryobi Cordless Nail Gun

I also added my bottom trim piece the same way on this part.

Attach Bottom trim

Now to build that face frame!  This is simple!  Just a few quick straight cuts and some pocket hole screws.  I am looking from the back of the cabinet and into the front where you can see the pocket holes on the bottom where this part attaches to the bottom trim piece.

Inside of Coffee Cabinet

coffee cabinet progress

I added my shelves next!  Each cabinet piece will be flush with the back of the cabinet and set back 3/4″ from the front.

You can set yours where you wish to fit your storage needs.  On one side I chose to space two evenly, and on the other I set one a bit lower so I could have a space for the Keurig.  Each shelf will need pocket holes on each 15″ long end to attach to the sides of the cabinet.

shelves of coffee cabinet

I built my cabinet doors next!

Although we give you guys the cuts for these doors, I always like to measure the opening before making the cuts to be sure on the size.  I like to make the doors 1/8″ smaller all around, which would be 1/4″ smaller than the width and height of each opening.  For the doors, you will have 4 longer pieces without pocket holes like this.

long door pieces

You will also have 4 smaller pieces each with pocket holes on both ends like  this.

short door pieces

I attached these pieces using wood glue and 1.25″ pocket holes screws  to create rectangles.

building cabinet doors

Each door looks like this!

Door Frame for Coffee Cabinet

Once the doors were finished I attached my back.  You can have Home Depot cut this for you as well, and use staples to hold the back in place since the material is only 1/4″ thick.

The top is planked boards.  I used my Kreg Jig to attach those as well before nailing them down to the cabinet.

Plank Top of Coffee Cabinet

Now for the drawer… My fav part!

I decided to make  a little pullout drawer for the coffee maker to sit on.  I thought this would make the water easier to change out, and it was just plain cool.  This is SO simple.

I started by cutting a piece of 3/4″ plywood at 14″ x 15.5″.

coffee cabinet pull out drawer

I trimmed this out with 1×2.  Just cut two pieces at 14″ and attach them with your nail gun.

trim drawer with wood

Your next two cuts will be 17″ and will be attached to the other sides.  I used the nail gun and glue to attach these pieces as well.

Now for the slides!  To make this easy I used some side mount slides but attached them to the bottom of the drawer.  I started by pulling them open and attaching them first to the bottom of the drawer.

Drawer Slides under drawer

Then, I pushed the pull back into place and set it inside the cabinet on that one shelf.  I slowly pulled it out which opened up the slide again.  Then, I just attached the pull to the inside of the shelf.  Easy!!

Before adding all the hardware, I got it all painted up.  I started by staining most of the piece with a new color that I love…

Varathane Stain Provincial

After that totally dried, I used a bit of Vaseline on my edges and corners.  It doesn’t take much, just a thin dab!  Next, I applied two coats of paint to the cabinet.  I chose to use a Sherwin-Williams color called Anonymous.  I LOVE IT!  Once that totally dried, I used my corner cat sander to distress the edges a bit.  Anywhere that I put the Vaseline just chipped right off… Woohoo!

I found all of my hardware at Home Depot.  The hinges are actually silver colored and I spray painted them black before attaching.

hinge from Home Depot

I used this hardware cloth on the inside cloth of the doors.

Hardware Cloth from Home Depot

I used a small pair of pliers to cut it to size, and attached it using my Ryobi Airstrike Staple Gun.

Use cordless stapler to attach hardware cloth to wood

Whew…. Please tell me I’m done.  I think I covered it all 🙂

Oh, minus a few more shots of this baby!!!

DIY Coffee Cabinet by Shanty2Chic

DIY Farmhouse Coffee Cabinet

Coffee Cabinet DIY

Coffee Cabinet

Distress Paint with Vaseline

And how cute is this tray I found at one of my FAV sites ever?!  It’s called www.save-on-crafts.com !  You guys… This site.  They have the cutest decor goodies, and it’s so affordable!  HERE is the link to the galvanized tray I filled with creamer and sugar.  $8.99 people.  And see the cute vintage green bottle in the background?? LOVE.  You can find the link to that one HERE!

Coffee Bar

Hope you guys LOVE this cabinet as much as I do… And my Keurig does ;-)!!

I would LOVE for you to pin and share this baby with all your friends!!

Thanks so much for stopping by!

Whitney

54 Comments

  1. Amy on November 14, 2018 at 5:57 am

    Could you do the sliding barn doors on this piece as it is? Is there enough room st the top to put the door hardware?

  2. Aniessa Lyan on August 3, 2017 at 10:37 am

    I’m very interested in building this! What is the cut list??
    I see the supply list but I’m confused as to how I make my cuts?

  3. Ricky Moran, Jr. on May 12, 2015 at 11:56 pm

    what type of latch you used on the doors?

  4. Teryn Bedford on May 8, 2015 at 2:04 pm

    I love this cabinet! I really like the latch on the doors to hold them closed! Where did that come from?

  5. Alex on April 21, 2015 at 3:40 pm

    love both the finished product and that you’ve included enough pictures to make the plan accessible for a beginner 🙂

  6. NICOLE N on March 23, 2015 at 9:24 am

    I knew there would be another coffee lover out there who did not have the space for their Keurig on the counter! I don’t know yet if I will make this or try to find an antique piece but thank you for the inspiration!

  7. Paige on March 17, 2015 at 1:22 pm

    What are the dimensions of this cabinet?

  8. Kristina on February 5, 2015 at 9:17 am

    What was the estimated cost of this project? I am trying to decide if I want to build one or buy one.

  9. Sara on January 29, 2015 at 5:14 pm

    Thank you so much for another fabulous build! I turned mine into trash and recycling center with tilt-out doors. Perfect!! I actually used Shanty’s tilt-out laundry dresser for inspiration

    • Ronnie on June 12, 2016 at 11:40 am

      Perfect! I cannot tell you how happy this makes me. I have been looking for this concept forever. (Thrift store, yard sales, etc.) I figured I would have to alter a cabinet, but finding the “right” cabinet without a drawer, proved impossible. Thank you very much for sharing. You did an excellent job! 🙂

  10. Carly on January 22, 2015 at 10:31 am

    What were the final dimensions on your cabinet?

Leave a Comment