Submitted By: Gale Bickle
Original Shanty2Chic project it was inspired by:
https://www.shanty-2-chic.com/2014/05/restoration-hardware-inspired-dining-table-for-110.html
Project (URL):
Time to Complete: 3 weeks
Total Cost: 200.00 not including the Kreg jigs
Finishing Details:
This was a promise never kept by a father to a daughter. I finally made good I used Minwax deep walnut stain and then did a minwax wiping urethane satin finish. 5 coats on the legs with 0000 steel wool in between coats. 11 coats of minwax wiping urethane on the top. #0000 in between coats. Table is oversized as our family is oversized. Next project will be a smaller version for my eat in kitchen with built in seating with storage underneath.\
Any suggestions or ideas please let me know