Bed

Submitted By: Brittney Adams

Original Shanty2Chic project it was inspired by:
https://www.shanty-2-chic.com/2015/04/diy-round-side-table.html

Project (URL):

Time to Complete: 2 months- Working on it on and off

Total Cost: $250.00- I got some 4×4’s from my dad

Finishing Details:
I used Varathans Kona Stain and then distressed it. I bought the planks down to 48″ each to save on lumber and I was also able to buy the 8 fts instead of the 10 foots. to make it narrower for a queen I eliminated 3 of the 1×6 planks and the 1×2’s. If I was to do it again I would keep the 1×2’s in there its a pretty tight fit. Make sure you measure you mattress!!!! The sides are 2×12’s so now I am hoping in the near future to add storage drawers underneath and get rid of the box spring. Plywood is ridiculously expensive right now in Canada. If you have any questions please ask 🙂 I love love love my bed

Ashley and Whitney Blog post signature

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

4 Comments

  1. Design teaching and research journal has published a recent case study for Interior designers. Fashion Institute of Design & Merchandising in San Francisco increased their tuition fee by 2% in 2021. At least, foreign students can apply for a grant.

  2. Are there plans for this in queen. I have always wanted to build this bed. I can only find the plans for the king