Learn how to build this DIY Corbel Sconce Light for $25! Great bedroom lamp but perfect for so many spots in your home! Free plans by Shanty2Chic.
After searching high and low for the perfect lamps to pair with my new DIY Rustic Modern King Bed and my DIY Sliding Barn Door Nightstands, I had a lightbulb moment 😉 I decided to combine our favorite DIY Rustic Corbel with a cute cage light to create this DIY Corbel Light Sconce! This is such a fun, and easy project for you guys to tackle this weekend!
We built this cutie for about $25 and it’s super easy to make yourself! Come hang out with us in our shop and build it with us! Just click HERE or the box below to watch!
How fun and easy is that!?!
Here is the run down of what you will need to build your own!
1 Pendant Light – HERE on Amazon
1 Light Cage – HERE on Amazon
1 – 2×4 stud
Your Kreg Jig – find our fave model HERE on Amazon.
and one wood chisel (find them at the hardware store).
And a nailer. We used our Ryobi 18V nailer but you can also use a hammer an nails.
You’ll also need some wood glue and a few wood screws 😉
That’s it! To hang it on the wall, I used a 3″ wood screw and drilled directly into the sconce (below the cross piece and above the top arm). I didn’t have studs behind the wall, to drill into. So, I drilled two pilot holes into the sconce and into the wall behind it. Then, I used THESE ANCHORS (hands down my favorite anchors for hanging) and screwed them into the holes in the wall. Then, I lined up the sconce holes with the anchors and used the 3″ wood screws. Super easy! You can use wood filler and stain to cover the holes.
Get the free plans for the rest of the pieces in my room by clicking HERE!