You only need two tools to build this DIY $7 Rustic Blanket Ladder with free plans and a full how-to video!

All you need to build this wooden blanket ladder is 3 boards, 2 tools and less than $10! That’s a lot of bang for your buck and you’ll have those throw blankets off the floor in no time! Grab a coffee and come build this DIY Blanket Ladder with us in our garage!

You can watch us build it below!

You can download the FREE Printable Plans HERE

You can also follow along in the how-to below!

How to Build a DIY Blanket Ladder

Supplies:

  • 3 – 2x3x8 Pine Boards or Framing Lumber
  • 2 1/2″ Finish Nails
  • Wood Glue
  • Paint or Stain

Tools:

  • Miter Saw (or Circular Saw)
  • Finish Nailer (or Hammer and Nails)

Step 1: Cut the Lumber for the Blanket Ladder

Start by making all of your cuts, based on the cut list in the free plans. I used my miter saw to make the cuts but a circular saw or hand saw would work great for this design because there aren’t any angles to cut.

Step 2: Attaching the Blanket Ladder Rungs

Rustic Blanket Ladder

Use a pencil and measuring tape to mark where each ladder rung should be, according to the PDF plans. Start at the top of the ladder and attach a rung with 2 1/2″ finish nails and wood glue. We used our Ryobi 16 gauge finish nailer.

Rustic Blanket Ladder

The ladder rungs should be centered on each 2×3 board so adding a scrap piece of 1/2″ wood, under the rungs, will make it easy to center them up.

Just work your way down the ladder, then attach the second side piece to the rungs.

Step 3: The Finish

Rustic Blanket Ladder

We gave the ladder two good coats of Charcoal Chalked spray paint by Rust-Oleum!

Rustic Blanket Ladder

To give the ladder a more rustic look, we used our Ryobi Corner Cat Sander to sand the edges of the ladder, to reveal the wood.

Make sure to use an old rag to remove the dust left behind. You can add a polyurethane if you would like. Rust-oleum makes a Chalked Matte Spray Paint poly.

That was it for the build!

Rustic Blanket Ladder

I love the chunky look the 2×3 boards give the ladder!

Rustic Blanket Ladder
Rustic Blanket Ladder
Rustic Blanket Ladder
Rustic Blanket Ladder
Rustic Blanket Ladder
Rustic Blanket Ladder
Rustic Blanket Ladder

I love blanket ladders because they offer the perfect combination of for and function! They make great storage for towels in bathrooms or outside by the pool. Of course, they’re great for blanket storage and add unique decor to any room! If you’ve got excess blankets or towels this is a great way to show them off!

Thanks so much for stopping by!

Happy Building!

Check Out Our Other Free Blanket Ladder Tutorials!

We always appreciate you pinning and sharing our Free Plans!

Rustic Blanket Ladder
Ashley and Whitney Blog post signature

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

29 Comments

  1. Greasing any garage equipment, or car, becomes quite a challenge, especially because of the difficulty of gripping. However, you still have to keep up the good work, whether you are a truck driver or a car owner, or you own an equipment farm. The good part is that lubrication is much easier with the Best Grease Gun Coupler.

  2. Eliminating old paint isn’t glamorous, but it’s the first step toward a closing ceremony look. There are a few choices, including media blasting, varnish chemicals, and baking soda, but refinishing is usually the most straightforward, especially if your car has many coats of paint. Of course, to go this method, you’ll need two things: solid skill and a decent vehicle paint remover sander.

  3. Thank you for the post. The Takesumi we import from Japan comes from the bamboo groves of the master burners. Moso and Tiger bamboos are used for the production of sticks, blocks, and powder. Take 竹 (bamboo) Sumi 炭 (coal).

  4. Did you prime the wood before spray painting it, or was it just two coats of the charcoal color? Thanks!

  5. In this article, you share more information, resources, and images.
    Just awesome!!
    Can you share with me how many types of finishing nailer out of market right now?
    Keep it up

    1. Hi,
      Hope you are doing well.
      sorry to say that I don’t want to stay anymore. Can you please, remove my comment and my backlink.

      “James Collins on January 9, 2020 at 11:39 pm
      In this article, you share more information, resources, and images.
      Just awesome!!
      Can you share with me how many types of finishing nailer out of market right now?
      Keep it up”

      Thanks and regards

  6. I recently made a ladder out of 2×2’s to keep in my closet to use for tall shelves. It’s lightweight and doesn’t take up a lot of room. Now I’m concerned that it’s not sturdy enough. Could your ladder be used as an actual ladder? I weigh 125lbs.

    1. If you used finish nails it probably isn’t strong enough. If you use screws or framing nails that would be much sturdier so the rungs don’t fail.

  7. If you have the Ryobi 18volt nail gun and it only allows up to 2 inch brad nails, what other suggestions do you have to attach the rungs?

  8. If you have the Ryobi 18 gauge nail gun and it only allows up to 2 inch brad nails, what other suggestions do you have to attach the rungs?

  9. Doesn’t the airstrike have a maximum of 2 inch nails? Couldn’t find 2.5 inch nails, then realized it has max of 2.

  10. Doesn’t the airstrike have a maximum of 2 inch nails? Couldn’t find 2.5 inch nails, then realized it has max of 2.

    1. The rungs in this plan are spaced 12″ apart, 3″ down from the top and 9″ up from the bottom which makes 12″ then each rung is 12″ from each other which equals 72″ which is 6′ but you can customize it if you wanted to. Not only can you finish it however you want with stain, paint, distressed, etc. but you can also make the ladder taller or shorter. You could space the rungs farther apart or closer together and you could use thicker or thinner wood. That is what is so great about having the plans because you can either build it exactly like the plan calls for or customize it however you like or depending on what materials you may already have!! You can use nails or screws, you can use pocket holes or any type of joinery that you want!! The possibilities are endless!