Ok… My love for this next piece is extreme! Look how cute this DIY Sliding Barn Door Console turned out! We partnered with Purdy to show how using high-quality painting tools makes all the difference in your final product. Read on for more!
You can check out the YouTube video tutorial HERE or by clicking the link below!
Before we get started, be sure to download and print the FREE PLANS by clicking HERE!
The first step of this build is to assemble the frame or box. This uses 3/4″ hardwood plywood. I had the guys at the hardware store rip mine to 12″ boards making it easier to get home. Then, I made my cross cuts using my miter saw.
I used my Kreg Jig to make 3/4″ pocket holes on the plywood panels. You can see on the plans where to make all of yours. I attached everything using wood glue and 1.25″ pocket hole screws.
Once you have all of the vertical boards attached, attach the top 1×6 board to the front and top of the box. This will be what hangs the barn door hardware in a later step. Attach this board using wood glue and 1.25″ pocket hole screws.
Now it’s time to attach the bottom trim. Attach the two side pieces first using wood glue and nails, and then attach the long front board also with wood glue and nails.
We are adding the shelves next. These are going to be attached using wood glue and 1.25″ pocket hole screws through the pocket holes on the bottom side of each shelf board.
Next we will add the front trim boards. These are 1×2 that we are attaching with wood glue and finish nails. We like to measure these and cut at this point to get an exact fit. Start with the vertical boards and then measure and cut for the horizontal boards.
Now we are attaching the top board. This is a pine project panel. You can typically find them on the common board aisle at the hardware store. I ripped mine down with my table saw to the correct width, but you can also have the hardware store do that for you. I made the cross cut for the length using my miter saw. Lay this board down with the good side facing the floor and lay the console upside down on top of it. Attach the two using 1.25″ pocket hole screws.
We are building the door next. This is super easy! This is also a pine project panel cut to size, and then we are trimming it using inexpensive pine craft boards. Start with the horizontal boards and then line up the diagonal boards and mark to make a tight fit. Attach these craft boards using wood glue and 5/8″ nails.
And now for the finish… Yeah! This is always the most fun part! It’s amazing how a good coat
of paint or stain can change the entire look of a piece. I started by staining the door and
console top using a Purdy 2.5” Syntox brush, which is a synthetic brush designed specifically for
latex and oil-based stains, paints, varnishes, and clears to provide a smooth, mirror-like and
even finish.
I decided to paint the rest of the console. I used a Purdy NEST 9” Paint Tray and the Purdy
Revolution Jumbo Mini Roller Frame with Ultra Finish Roller Covers to make this
part really fast and simple!
To add to the rustic feel, we chose to use HGTV HOME by Sherwin-Williams INFINITY® Interior
Complete One-Coat Paint & Primer in Software (HGSW1463), with a satin finish.
Seriously I LOVE this roller! The microfiber is the bomb and I had the whole cabinet painted in under 30 minutes! It picked up and distributed paint so evenly, I never had to worry about paint dripping, or the roller dragging or catching.
After everything dried I added the hardware. I found the MOST amazing hardware. The best part?? It was under $40! Crazy! You can find it HERE!
And here she is all finished up in my entryway! I’m so happy with how this turned out. The Purdy
tools really made all the difference in the look and feel of the final product; the paint is smooth
and even with no streaking or bubbling.
Total cost price of this?
Where is the link for barn door hardware? Thanks!
Where is the link for barn door hardware? Thanks!
I am a newbie to the woodworking world. Could you help me understand what a Pine Project Panel is and where can i find it? Also, i cant find the 3/8x6x2 and 3/8x4x2 craft board online at lowes or home depot, how do i find them? All other cut list items I have. Help Please
I’m having the same issue, please tell me you’ve figured it out or they secretly replied to you. Someone please help!!!
It’s in the trim section at Home Depot. Paint grade is around $20 and stain grade is around $30
Taylor I love you!!!!!!! thanks so much! I asked around at home depot and no seemed to know what I was talking about. Wish me luck!
I am a newbie to the woodworking world. Could you help me understand what a Pine Project Panel is and where can i find it? Also, i cant find the 3/8x6x2 and 3/8x4x2 craft board online at lowes or home depot, how do i find them? All other cut list items I have. Help Please
I’m having the same issue, please tell me you’ve figured it out or they secretly replied to you. Someone please help!!!
It’s in the trim section at Home Depot. Paint grade is around $20 and stain grade is around $30
Taylor I love you!!!!!!! thanks so much! I asked around at home depot and no seemed to know what I was talking about. Wish me luck!
What are the finished dimensions?
I think I found it. What about the handle on the door?
What are the finished dimensions?
I think I found it. What about the handle on the door?
Also, what’s the standard size of a pine board panel? Would it be difficult to make the same console about 5 inches deeper?
Laminated Pine Board or project panel 🙂 You would just need to adjust the widths of the boards to make it deeper!
Hi, I’m nearly done building this. But the hardware link is broken. So I’m looking for alternatives. The sliding barn door hardware shape appears to be rhombic. But is the rail length 6ft or 5.5ft?
Also, what’s the standard size of a pine board panel? Would it be difficult to make the same console about 5 inches deeper?
Laminated Pine Board or project panel 🙂 You would just need to adjust the widths of the boards to make it deeper!
Thank you so much!
Yes paint and stain colors please! Love this for my entryway!
Software by Sherwin Williams is the paint and Briarsmoke is the stain 🙂
Yes paint and stain colors please! Love this for my entryway!
Software by Sherwin Williams is the paint and Briarsmoke is the stain 🙂
I would love to know the name of the paint color and stain, please! I’m making this for my living room!
Did you ever receive the color info?
I didn’t. I guess they don’t check their comments or reply to them very often. Lol
Briarsmoke is the stain and Software by Sherwin Williams is the paint. Thanks!
Thank you! Stain is Briarsmoke and paint is Software by Sherwin Williams!
Briarsmoke Stain and Software by Sherwin Williams is paint 🙂
I would love to know the name of the paint color and stain, please! I’m making this for my living room!
Did you ever receive the color info?
I didn’t. I guess they don’t check their comments or reply to them very often. Lol
Briarsmoke is the stain and Software by Sherwin Williams is the paint. Thanks!
Thank you! Stain is Briarsmoke and paint is Software by Sherwin Williams!
Briarsmoke Stain and Software by Sherwin Williams is paint 🙂
Love this console table! I know you guys have said what the paint and stain is probably a million times but I can’t seem to find it in any of your videos
Thank you! Software by Sherwin Williams for paint and Briarsmoke for stain 😉
Love this console table! I know you guys have said what the paint color is probably a million times but I can’t seem to find it in any of your videos
Thank you! Software by Sherwin Williams for paint and Briarsmoke for stain 😉