Learn how to build this easy DIY Clip Frame with free plans and a how-to video by Shanty2chic!

Staying at home so much lately, has had me revamping so many things around my house. I’ve been so bad about framing recent pictures so I decided to tackle that this week! I had some left over barn wood scraps so I got to work and designed this cute DIY Clip Frame!

Grab a cup of coffee and watch this how-to video!

So cute, cheap and easy!

Now for the how-to!

Click here to the Free Printable Plans!

Supply List

Tools

How to Build a Clip Frame

Step 1 – Attach the Planks

Cut the barn wood planks to size. Flip them upside down and measure and cut the back support pieces to size.

Run a line of wood glue down each back support.

Attach the back supports to the back of the barn wood planks with 5/8″ brad nails.

Step 2 – Attaching the Trim

Flip the frame right-side-up and measure and cut the top and bottom frame pieces to size. Attach them to the ends of the frame with 1 1/4″ brad nails and wood glue. The bottom of the trim pieces should be flush with the back support pieces.

Cut the side trim pieces to size and attach them to the sides of the frame with 1 1/4″ brad nails and wood glue.

Step 3 – Attaching the Clip

Center a bulldog clip 2″ from the top of the frame and attach it with hot glue. I used barn wood so I didn’t need to add a finish!

Make sure to share your builds with us on social media and use #shanty2chic so we can share them too!

Happy Building!

5 from 2 votes

DIY Clip Frame

Learn how to build this DIY Clip Frame with free printable plans and how-to video by Shanty2Chic!
You can download the full set of FREE Printable Plans including the supply list HERE!

Tools

  • Miter Saw
  • Nailer

Supply List

  • 1 1/2" x 5 1/2" x 48" Barnwood Plank
  • 1 3/4" x 1" x 65" Scrap Board
  • 1 1/4" x 1 1/2" x 36" Scrap Board
  • 1 1/4" Brad Nails
  • 5/8" Brad Nails
  • Wood Glue
  • Bulldog Clip

Instructions

  • Cut List
  • Cut the barnwood planks to size. Flip them upside down and measure and cut the back support pieces to size. Attach them to the back of the barnwood planks with 5/8" brad nails and wood glue.
  • Flip the frame right-side-up and measure and cu tthe top and bottom frame pieces to size. Attach them to the ends of the frame with 1 1/4" brad nails and wood glue. The bottom of the trim pieces should be flush with the back support pieces.
  • Cut the trim pieces to size and attach them to the sides of the frame with 1 1/4" brad nails and wood glue.
  • Center a bulldog clip 2" from the top of the frame and attach it with hot glue. I used barnwood, so I didn't need to add a finish! make sure to share your builds with us on social media and use #shanty2chic so we can share them too! Happy Building!
Ashley and Whitney Blog post signature

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

Recipe Rating




2 Comments

  1. 5 stars
    I agree these posts are inspiring! I learn SO much when from watching the videos. I look forward to trying these frames. Keep up the exciting challenges!

  2. 5 stars
    Their diy projects are so fun and inspiring! I want to run out to the garage and start a new project everytime I see one of them!