DIY Angled Console Table

3.67 from 3 votes

Learn how to build this easy DIY Angled Console Table with free printable plans, how-to instructions and a how-to video by Shanty2Chic!

Cut the planks to size and drill 1 1/2" pocket holes along one edge of 3 of the planks. Attach them together with 2 1/2" pocket hole screws and wood glue.
Cut the legs an top supports to size and drill 1 1/2" pocket holes at the long point ends of each leg. Attach them to the top supports with 1 1/2" pocket hole screws and wood glue. Build 2 leg assemblies.
Cut the bottom supports to size and attach them between the legs with 2 1/2" wood screws and wood glue. Do this for both leg assemblies.
Attach the leg assemblies to the bottom of the planked top with 2 1/2" wood screws and wood glue.
Cut the runner to size, center it on the bottom leg supports and attach it with 2 1/2" wood screws and wood glue from outside of the supports and into the runner.
Cut the cross supports to size and attach them to the bottom of the planked top and the top of the runner with 2 1/2" wood screws and wood glue.
Cut the runner extensions to size, center them and attach them to the bottom let supports with 2 1/2" finish nails and wood glue.
Cut the leg extensions to size and attach them to the outside of the legs with 2 1/2" finish nails and wood glue.
Now, just fill your nail and pocket holes, sand it down and add a finish!
Make sure to share your builds with us on social media and use #shanty2chic so we can share them too!