Submitted By: Shana Geromini
Original Shanty2Chic project it was inspired by:
https://www.shanty-2-chic.com/2014/03/diy-wood-and-metal-pipe-blanket-ladder.html
Time to Complete: 2 hours plus dry time
Total Cost: $30
Finishing Details:
After drilling the holes with a 1″ paddle bit & sanding all over, I stained the 2×4’s with a coat of Minwax Special Walnut & then 2 coats of Minwax Weathered Oak. After they were dry I sanded all over for a light distressed effect & then sealed them with Rust-Oleum Matte Finish Polyurethane.
