Sliding Barn Door Nightstand – DIY

We are back to share the free plans for the DIY Sliding Barn Door Nightstand that we built with our $20 DIY Barn Door Hardware. If you missed that tutorial, you can find it HERE.

Sliding Barn Door Nightstand

I built a new Rustic Modern King Bed and I wanted something fun for my nightstands. I have always thought that my DIY Barn Door Bathroom Cabinet would make a cool nightstand so, I gave it a shot! I am so happy with my new nightstands and after I gave a little sneak peek of them, we had tons of requests for a how-to video! So, we did just that! Come hang out with us in my shop and see how we built it! Click HERE or the image below to watch the video.

So fun, right! We’ve also got the FREE PRINTABLE PLANS! Just click HERE to download them and you can follow along with us as we build in the pictures below!

Sliding Barn Door Nightstand

Sliding Barn Door Nightstand

To start, we had the hardware store rip our hardwood plywood to the correct widths. Then, we used our miter saw to make the cross cuts on each sheet. Make sure to check our our How to Rip Plywood and our How to Use a Miter saw videos. We show you out tips on cutting plywood 😉

Sliding Barn Door Nightstand

Next, we used our Kreg Jig to drill 3/4″ pocket hole screws. Refer to the plans for proper placement. You can find our favorite Kreg Jig model HERE on Amazon and check out our How to Use a Kreg Jig Video HERE.

Sliding Barn Door Nightstand

Here are the side, top, bottom and shelf of the nightstand.

Sliding Barn Door Nightstand

Time to build the frame. Attach the bottom piece to the side pieces with 1 1/4″ pocket hole screws and wood glue. Make sure the pocket holes are facing down, on the bottom piece and inside on the side pieces.

Sliding Barn Door Nightstand

This here is one of our favorite discoveries! Whit found this Glue Bot on Amazon and it is the BOMB! You can apply glue with the bottle upright and it doesn’t clog! You can find it HERE on Amazon.

Sliding Barn Door Nightstand

At this point, you cabinet will look like this.

Sliding Barn Door Nightstand

Now, it’s time to attach the shelf piece. Put a screw piece of plywood under the front side of the shelf. This will give you the 3/4″ gap,  that you need for the trim piece and the 1/4″ gap on the back, for the backing. With the pocket holes facing down, attach the shelf with 1 1/4″ pocket hole screws and wood glue. The placement of the shelf if up to you. I centered mine, so that both of my baskets would fit.Sliding Barn Door Nightstand

Here is the nightstand from the front, now.

Sliding Barn Door Nightstand

Now is a good time to attach the front trim piece, on the shelf. I used a 1/2″  x 3/4″ stick of trim (you can rip your own from a 1x board, as well). This will cover up the rough plywood edge. Apply a thin line of wood glue to the back of the trim

Sliding Barn Door Nightstand

and attach it to the front of the shelf with 1 1/4″ brad nails. I used my Ryobi 18v Airstrike.

Sliding Barn Door Nightstand

Turn the nightstand around and attach the top support to the back of the nightstand with 1 1/4″ brad nails and wood glue. Make sure to leave a 1/4″ gap on the back.

Sliding Barn Door Nightstand

Next, measure and cut the face from pieces to size. Drill 3/4″ pocket holes in the ends and top of the top board and the ends of bottom board. Attach them to the side pieces with 1 1/4″ pocket hole screws. Refer to the plans for pocket hole placement.

Sliding Barn Door Nightstand

Here is the back of the face frame. Notice the pocket holes are facing UP on the top board.

Sliding Barn Door Nightstand

Attach the face frame to the nightstand with 1 1/4″ brad nails and wood glue.

Sliding Barn Door Nightstand

Here she is with the face frame attached.

Sliding Barn Door Nightstand

Now for the base trim. Measure and cut the side pieces to fit and attach them with 1 1/4″ brad nails and wood glue.

Sliding Barn Door Nightstand

Then, measure and cut the front piece to fit and attach it the same way.

Sliding Barn Door Nightstand

Flip the nightstand upside down and place in on top of the top piece. There should be a 1/4″ overhang on the front and sides and the top should be flush with the back of the nightstand. Attach the nightstand to the top piece with 1 1/4″ pocket hole screws through the pocket holes in the sides and front of the nightstand.

Sliding Barn Door Nightstand

Flip the nightstand back over and it’s time to trim the top!

Sliding Barn Door Nightstand

Using the same trim that we used for the shelf, measure and cut the side pieces then, attach them with 1 1/4″ brad nails and wood glue.

Sliding Barn Door Nightstand

Follow up with the front piece. This covered up the rough edges of the plywood!

Sliding Barn Door Nightstand

Now, attach the backing to the back of the nightstand with 5/8″ staples and wood glue. I used my Ryobi Airstrike Stapler but you can use your nailer here too. We like to use staples to attach 1/4″ backing because the staples grip the board and keep it from pulling off.

Sliding Barn Door Nightstand

Now for the door. I cut my planks and drilled 3/4″ pocket hole screws in three of the boards. Then I attached them together with 1 1/4″ pocket hole screws.

Sliding Barn Door Nightstand diy

Here’s the door, all finished!

Sliding Barn Door Nightstand

For the finish, I went with Briarsmoke stain by Varathane. Check out our How to Stain Wood video HERE!

Sliding Barn Door Nightstand

Once the stain dried, I attached our $20 DIY Barn Door Hardware and called it a day! Click HERE to learn how we built this hardware!

Sliding Barn Door Nightstand Sliding Barn Door Nightstand Sliding Barn Door Nightstand Sliding Barn Door Nightstand Sliding Barn Door Nightstand

I couldn’t love my nightstand more! I keep all of my junk in the baskets and I keep magazines, my tablet, laptop and other stuff behind the door 🙂

Want to know more about everything in this space! Follow the links below!

Baskets – AtHome

Light Sconce – Video and plans coming soon – click HERE to subscribe!

$20 DIY Barn Door Hardware – HERE

DIY King Bed – HERE

Bedding – HERE

“A” figurine – HomeGoods

Candle Holder – HERE

Thanks so much for stopping by!

Happy Building!


  1. Soni Max on April 25, 2021 at 8:12 am

    Thank you for sharing such great projects. I just finished building one of the sliding barn door nightstands for my daughter-n-law. Your instructions are so well done, that it is one of the best builds I’ve done so far.

  2. TRAM TRUONG on July 6, 2020 at 7:02 pm

    Have the plans been taken off this site? I can seem to be able to download any plans so I can see the dimensions of the cuts.

  3. Amy on June 22, 2020 at 5:08 pm

    Can you tell me the color of paint in this picture?

  4. Trace on May 20, 2020 at 1:24 pm

    What are the final dimensions?

  5. Bhawna on February 3, 2020 at 5:15 pm

    This is super adorable. I will have to look at the video in more detail and have to sign up for my hubby to do this for our daughter’s room. Love it. So creative!

  6. Adrian Suarez on January 27, 2020 at 7:45 am

    Do you rip the trim pieces and door boards to width or leave the rounded edges?

  7. Ashley on September 23, 2019 at 10:52 am

    What size are the baskets? I have looked on the AtHome website, but I am not sure which size would be best. Thanks so much!!

  8. Dennis S. on September 17, 2019 at 8:50 am

    I built these and they are awesome!! Simple to follow plans !! You ladies do amazing work!! Thank you for sharing all of these tremendous ideas!!

  9. Symantha on August 2, 2019 at 3:47 pm

    Can anyone help me find a link to those baskets?! ?

  10. Daniel Sandefur on March 6, 2019 at 11:18 am

    I watched your video on the DIY Barndoor hardware. When you attached the hardware to the nightstand, how do you secure the hardware so it doesn’t roll off the sides of the nightstand?

  11. Tara Hatfield on February 16, 2019 at 6:46 am

    I just wanted to say thank you for this barn door nightstand idea. I made 2 and a king size bed frame and we absolutely love all of it. I would love to send you pictures.

  12. Tara on January 29, 2019 at 2:20 pm

    Thanks for the idea. I built my own to go with my bed a built and I love it.

  13. Rene Fontaine on September 30, 2018 at 2:47 pm

    I build a set for myself and and son with pallet and barn wood, looks awesome. We are having a hard time finding baskets at a reasonable price. Can you give any advice on where you found yours?


    • Robyn Reed on January 28, 2022 at 5:46 pm

      Hi could this be made for a queen size bed too?

  14. Ally on July 18, 2018 at 5:49 am

    Does anyone know the name of the paint color on the walls?

    • ✨?✨????✨?✨?
      I built my own using the plans at www. – highly recommended you check those out too. They are detailed and super easy to read and understand unlike several others I found online. The amount of plans there is mind-boggling… there’s like 16,000 plans or something like that for tons of different projects. Definitely enough to keep me busy with projects for many more years to come haha



    • Trish Allen on November 5, 2018 at 10:37 am

      Seine by Valspar

  15. Shaneil Miller on July 17, 2018 at 8:14 am

    What’s the name of the stain.

  16. Roger Vander Lugt on June 14, 2018 at 11:54 am

    I modified the cutting patterns so that I could make two of these without having to get a full 2nd set of materials. The 4×8 Plywood is expensive, and by changing the layout I was able to get a 2nd nightstand by only adding a 4×4 sheet of plywood plus the other trim boards.

    Only question I have: You always list length of pocket hole screws; but never the size (#8 vs #10, etc…) Do you have any guidance on which ones to use for different connections? I’m assuming since this is only 3/4″ lumber that #8’s would be good; but when connecting thicker lumber what do you recommend using. Maybe adding that to the plans (instead of 1 1/2″ Pocket Hole Screws you could say #8 – 1 1/2″ Pocket Hole screws so we know we’re getting the right size.

    Great plans! Really love your site!

    • Angela on January 18, 2021 at 1:56 pm

      Can you send me a picture of how you laid out the wood on the 4 x 8 to cut for 2 nightstands?

  17. Danielle on April 30, 2018 at 6:06 pm

    I printed the plans and see the cut list at the top and step 1 says drill the pocket holes, but I don’t see how far are the pocket holes on the sides supposed to be appart?

  18. Jess on April 9, 2018 at 2:32 pm

    Love this idea!!

  19. Christina on January 23, 2018 at 6:30 am

    Any plans for a matching dresser? If not, what did you use? Thanks!

  20. Sam on January 16, 2018 at 10:01 pm

    Where are the dimensions for the pocket holes?

  21. Heather Hall on October 24, 2017 at 6:42 am

    I Love This idea but I am looking for this same thing in a bookshelf form, something that is 7ft tall. I have looked all over your site and can not find anything. Do you think y’all can make this and have a patter with step by step instruction? I would greatly appreciate it.
    My husband and I have just gotten the supplies to make the Pottery Barn Farmhouse table. This will be our first time using the kreg jig. I look cool!

  22. chris on October 23, 2017 at 11:27 pm

    What are the actual measurements for the top, sides, and bottom along with the 2×4 pieces? Guess I’m confused on the actual height width etc of this project. Definitely want to make these for my fiancée as a surprise for our new place together. Already tackling a TV stand farm door style unit might as well build these. Any additional information greatly helps. Thanks in Advance

    • Shanty2Chic on October 24, 2017 at 5:41 am

      Have you downloaded the plans? We have the finished dimensions on the plans 🙂

      • chris on October 24, 2017 at 11:06 am

        Well that would be a good idea thanks for the fast reply. I’ll do that now.

        • chris on October 24, 2017 at 11:32 am

          By the way. What was total cost of materials?

    • Liana Sicroff on April 17, 2018 at 11:10 am

      I have a question about the hardware. Is it possible to use store-bought hardware instead?

  23. Missey Norris Daniels on September 29, 2017 at 11:22 am

    What are the finished dimensions on this? Please and thank you love them.

  24. Mark Dowdle on September 6, 2017 at 4:21 pm

    When you say you had the hardware store cut all your widths and then you made all the cross cuts with your miter saw at home, what widths did you have them cut. It is difficult to tell from the cut list on the plans what cuts I need to have the hardware store make versus what I can do at home with my miter saw. Any additional clarification helps. Want to make these plus the rustic modern king bed for my wife and I.

    • Shanty2Chic on September 6, 2017 at 4:27 pm

      Have them cut the long cuts. So the cuts that run the full 8ft length of the plywood. For this project I would have them rip 17 1/2 and 16 1/4″. Then, I would take it home and make the cross cuts. A could of the boards are more narrow, so I would then go back and shave off the extra inch with the Miter saw (or a circular saw). Hope this helps!!

      • Mark Dowdle on September 7, 2017 at 9:50 am

        Will do. Thanks for the quick reply. I will post pics when complete. THX!

  25. Melanie on September 2, 2017 at 8:46 pm

    I’d be curious to know if the paint comes off rollers and metal bar after use?

    • JR on March 15, 2019 at 11:20 am

      Same question here. Can anyone respond with how well the paint has held up on the rollers and aluminum flat bar? Thanks!

  26. Angela Nicol on July 3, 2017 at 12:21 pm

    Where did you purchase the hardware for the barn doors?

  27. Jessica Kaepernik on May 28, 2017 at 3:42 pm

    When talking about sizes, a 2″x4″ board isn’t actually 2″x4″ in the store (normally they’re a bit smaller.) With the sizes listed here, are those sizes accommodating those adjustments or are they really the listed sizes?

    • Shanty2Chic on May 28, 2017 at 4:00 pm

      Yes. All of our plans are based on dimensional lumber sizes.

  28. EB on April 24, 2017 at 2:05 pm

    question – do you ever have issues with the doors warping afterwards?
    I had an overlay door that was perfectly square when i installed, but now is slightly warped on one of the top corners. Is there something that can prevent that?

  29. Susan O on April 16, 2017 at 1:25 pm

    Great plans ladies! I love sliding door media cabinets, but we have a small living room and this will be perfect in our corner.

  30. Jamie Hannah on April 7, 2017 at 9:11 am

    Do you need to buy any top coat like polyurethane to put on these after you stain them? Im not familiar with polyurethane, but someone had mentioned it to me. I can’t wait to make these for the bedroom!

Leave a Comment