Hey guys!

I wanted to show you guys the next step in my dining room overhaul.  I spent the last few days revamping the dining room furniture.  Here is how I did my table…

You guys remember the before??

The top of the table was stained wood but it had a red cast to it that I was a bit “over”.  And, I was ready to brighten her legs up too!

I did lightly sand the top of the table.  There are a few scratches on it and I thought better safe than sorry!

I used a 120 grit sandpaper to lightly go over the top.  I sanded just a bit harder over my scratches.

During this process I also found some lovelies that my sweet kids left for me….

I found this primer back when I was repainting my laundry room cabinets and fell in LOVE.   It has never let me down and seems to stick to just about anything.  I only used one coat on the top of the table.  I decided to not put any on the legs because they were already painted.

Primed and ready…

I applied both my primer and paint using the same roller.  I swear by these things, and I promise once you use them you will not go back.  They are Whizz Roller Systems.

I get mine at Lowe’s and they come with a small 4″ roller.  Love them.

The paint color I went with is a Dutch Boy color called Clam Island.  I didn’t love the name of the color but it matched my spray paint perfect 😉   I will get to that in my next post!  I put on 2 coats of paint to both the table top and legs.  I did have to use a brush on the legs.

Now I was ready to distress.  I went back and forth over this.  I wasn’t sure I wanted it distressed but finally decided to lightly go for it.  I figured that with 5 kids running around the table may get scratched a time or two.  The distressing will just make it all blend, right??

I used a 120 grit sanding block to lightly sand the edges and the details on the legs.

Finally I put two coats of Polycrylic on the top.  I love the durability of this stuff!  I use it on all my painted furniture.  I like that it is water based so it doesn’t stink too bad and you can work inside.  I also like that it doesn’t yellow like polyurethane.

That was it!  I was done… With the table.  The chairs were a different story, and I will share that later.  For now… Here are the results.  I still have stuff to add to the walls and a few other things.  It’s getting there though!

Thanks for stopping by guys!  Let me know if you have any questions!

Here are a few of my other dining room revamp posts!

Painting my Walls Gray!

DIY Window Panels

Ashley and Whitney Blog post signature

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *


    1. ?✌?✌?✌?✌So happy with how mine looks! I used the plans at WoodworkPlans.info to build mine – I highly recommend you visit that website and check their plans out too. They are detailed and super easy to read and understand unlike several others I found online. The amount of plans there is mind-boggling… there’s like 16,000 plans or something like that for tons of different projects. Definitely enough to keep me busy with projects for many more years to come haha

      Head on over to www. WoodworkPlans.info – click the pink link above for some more plans! Best of luck on your building adventures!


  1. Love your table, seat fabric & your grey paint. WHAT COLOR IS YOUR GREY? I have about 17 swatches of grey up right now for my dining room. Please share.

  2. Love your table painted! It really brings out the details. And the gray/white/yellow combination is so pretty!