DIY Full Length Mirror!

DIY Full-Length Mirror on a Budget – Easy Beginner Woodworking Project

Looking to upgrade your space without breaking the bank? This DIY full-length mirror is stylish, affordable, and beginner-friendly — and we’re sharing the free plans and full tutorial to help you build your own!

Why I Built These Mirrors

I’ve been wanting to add mirrors to my dining room for a while, and the idea finally clicked while working on my DIY jewelry cabinet. The frameless beveled mirror I used there was the perfect size — so I grabbed a few more and got to work!

Here’s how my DIY wall mirrors turned out:

Cute, right? Even better — each one cost me less than $40 to make. 🙌 This project is simple enough for beginners and makes a great Kreg Jig starter project!

---

Supply List for 3 DIY Full-Length Mirrors

• (6) 1×4×6 whitewood or pine boards
• (6) 1×2×8 whitewood or pine boards
• (1) ¼” plywood sheet cut into three 16″ × 55″ pieces
• (3) Frameless beveled door mirrors from Target ($14.99 each)
• Corner brackets (decorative)
• Wood glue
• 1¼” pocket hole screws
• ¾” staples
• Mirror adhesive
• Optional: D-rings for wall hanging, drywall anchors

Step-by-Step Tutorial

1. Build the Mirror Frames

Use the 1×4 boards to build the main frame. Each mirror frame needs:

• (2) long vertical pieces
• (2) shorter horizontal pieces

I cut everything with my miter saw and used a Kreg Jig to drill pocket holes in the shorter boards. (I love the Kreg K5 model — worth every penny!)

Then I used 1¼” screws to attach the frame together. Easy!

2. Add the Plywood Backing

Next, I glued ¼” plywood onto the back of each frame. Home Depot cut my plywood to size — 16″ × 55″ — so I could get all three pieces from one sheet.

I attached the backing with my Ryobi AirStrike Stapler (yes, cordless and amazing!) using ¾” staples.

---

3. Add the Trim

Time to make it pretty! I used the 1×2 boards to frame the front:

• Top and bottom pieces: 19″
• Side pieces: 56½”

I glued and nailed the top and bottom trim pieces first, then added the sides. Align the trim flush with the back edge of the plywood — this helps the mirror hang neatly on the wall.

---

4. Distress and Stain the Frame

I gave each frame a rustic look by sanding the corners and adding dings with a hammer. Then I stained them using Varathane’s Carrington — a rich, warm brown that dries in under an hour and only needs one coat. Love it!

---

5. Attach the Mirror

I used mirror adhesive (sold in caulk-style tubes at Home Depot) and ran a continuous bead along the back of the frame. Then I pressed the mirror onto it and let it set.

Note: The mirrors I used were from Target. If yours are a different size, just adjust your cuts to fit!

---

6. Add Hardware for a Custom Touch

I wanted to give the mirrors a little industrial flair, so I spray-painted some metal corner brackets with Rust-Oleum Canyon Black and attached them to each corner.

---

7. Hang Your Mirrors

For hanging, I used self-drilling drywall anchors (my go-to!). They’re super easy to install and hold strong.

I attached heavy-duty D-rings to the backs of the mirrors and hung them directly on screws in the wall.

---

Finished Look

And here they are — my new favorite feature in the dining room!

These DIY rustic full-length mirrors make such a big impact when you walk into the room. They’re budget-friendly, customizable, and surprisingly easy to make. I hope you love them as much as I do!

---

Pin & Share This Project!

If you enjoyed this tutorial, I’d love for you to share it or pin it to save for later! And if you try it out, tag me so I can see your version!

---

Other Projects in This Room

• DIY Sideboard and Hutch – Inspired by Restoration Hardware
• DIY Dining Table
• Dining Bench Build
• DIY Wall Panels

---

Let me know in the comments if you have any questions, or just want to say hi. Happy building!

---

Restoration Hardware inspired Sideboard and Hutch

DIY Dining Table

DIY Dining Bench

DIY Dining Room Panels