Submitted By: Kelly Hart

Original Shanty2Chic project it was inspired by:
https://www.shanty-2-chic.com/2016/05/diy-engineer-print-frame.html

Project (URL):

Time to Complete: 45 minutes per frame

Total Cost: $5 per frame

Finishing Details:
I used 1×4's for the inner frame and 1×2 ferring strips for the outer frame. I used pockets holes to join the 1×4's and wood glue and brad nails to attach the ferring strips. I sanded all the pieces with 220 grit sandpaper before assembling the frame.

Ashley and Whitney Blog post signature

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *