Window Box !!

Oh hey friends!  Happy Monday!

I made these great window boxes a couple weeks ago, and I’m here today to share how to make them for yourself.  Here is how they turned out!

Window Planter Boxes

I LOVE them!  They add so much to those windows, and they were a breeze to make!  Plus, I made each one for under $20 in wood!

Here is what I did!

First, I found these great window box liners at The Home Depot!

Screen shot 2013-07-22 at 12.09.23 PM

I decided to design my window boxes off of these.  That way, I can easily change out the plants as the seasons change over, and it helps keep the plants from drying out as well as helps to keep the wood from rotting.  Win win!

For the box I first used a 5/8″x6x6 cedar fence panel.  You will need 1 of these per box and they cost under $2.

Here are the cuts and how I assembled step 1!

window box sizes 2

I used Gorilla Wood glue and finish nails on this whole thing!

I used my favorite Ryobi AirStrike nailer for this part!

Ryobi AirStrike Battery Nailer

Now for the long sides!  Here are the measurements for those!  I used a 1x8x8 cedar board for this part.

Window Box Sizes

I attached those two pieces with Gorilla Wood Glue and finish nails as well!

cedar box

Almost done!

My last step is trim!

I used a 1x3x8 cedar board for the bottom trim piece and a 1x2x8 cedar board for the bottom trim piece.

Cedar Window Box_edited-1

And for the small side pieces… They were all 7.25″.  I kept the back of the box flush to go up against the wall better!

cedar planter box_edited-1

How to build a planter box

That’s it!

My final step was giving the whole thing a coat of my very fav…


Rust-Oleum Dark Walnut Ultimate Wood Stain

and since these guys will be sitting in the elements, I also gave them 3 coats of Spar Varnish!  This stuff is simple!  Just apply with a brush!


Once they dried, I attached them to my brick.  You need a hammer drill to drill into brick!  Luckily Ryobi has you covered if you don’t have one!

I used these galvanized brackets found in the ROOFING section to attach mine to the wall.  I attached the L brackets to the brick and then attached each box to the L bracket.  You need to get galvanized L brackets.  The zinc brackets will corrode over time.

Here is a shot from below!

How to hang a window box

And you can see how I filled the plastic liner up and then just dropped it into the cedar box… EASY!  And… when I’m ready to change out the plants all I have to do is pull that liner out, refill it with new plants and drop it back in… LOVE!

Window Box Liner

And a few final shots…

Window Planter Boxes

Window Box

Window Box Planter

Window Box Planter DIY

Planter Box Window

What do you think??

For those of you wondering… I filled mine with sun caladiums and sweet potato vine.

I would LOVE for you to pin these are SHARE them with your peeps below!  Have an awesome Wednesday!



  1. NameerFaris on May 11, 2020 at 12:46 pm

    Great blog and thanks for the info.

  2. Christine Barton on May 19, 2017 at 9:53 pm

    any advice for attaching to stucco?

    • on July 29, 2018 at 11:10 am


      ❤❤ I built my own using the plans at www. – highly recommended you check those out too. They are detailed and super easy to read and understand unlike several others I found online. The amount of plans there is mind-boggling… there’s like 16,000 plans or something like that for tons of different projects. Definitely enough to keep me busy with projects for many more years to come haha

      ❤❤ Head on over to www. if you want to learn more – click the pink link above for some more plans! Best of luck on your building adventures!


  3. Kathy Findlay on May 1, 2017 at 10:10 pm

    Just a quick clarification–it looks like the bottom trim extends below the planter far below is it? Thanks-they’re beautiful. I’ve been trying to figure how to keep the deer from pulling the boxes off the little shelf. This could be my answer 🙂

  4. Karen on November 27, 2015 at 6:16 pm

    Hi, I just found this post through a Pinterest link. Did you landscape your property yourself? It is so beautiful. I would love to pretty up the front of my house. Yours is inspiring. If you did it yourself, how did you figure out what to plant and how to do it? Thank you.

  5. Mary L Holman on January 10, 2015 at 7:40 am

    Wonderful! Couldn’t bring myself to spend $150 for these, now I won’t have to.

  6. kerry on July 23, 2013 at 9:21 am

    love it! In your spare time….I know you are laughing…could you throw out an idea for making flower boxes for siting on top or attaching to a porch railing. Mine are plastic and are a little rounded…what would you suggest?

  7. lfhpueblo on July 22, 2013 at 10:06 pm

    Wow, very, very nice. Love the choice of plants too.

  8. Lisa Raes on July 22, 2013 at 9:39 pm

    Wow what a difference that makes, it was just what the house needed up against the bricks and the stain color was perfect


    Creative Raisins

  9. Dakota Creek Chic on July 22, 2013 at 9:33 pm

    Love them, they turned out super cute!!

  10. CityGirlCountryBloke on July 22, 2013 at 1:56 pm

    So simple and it looks beautiful! Must put it on the list of things to make!

  11. Linda Crandall on July 22, 2013 at 1:15 pm

    Wonderful post!

  12. naomi on July 22, 2013 at 11:59 am

    HEY!! it looks really good..those sweet potato vines look VIBRANT!

Leave a Comment