We have built all of our kids multiple bed, throughout the years! We realized we have been neglecting Man’s Best Friend! We couldn’t just design any dog bed, it had to be Shanty Style so here it is – a DIY Farmhouse Dog Bed! Just click the Play Button below to watch!
We designed this dog bed to fit this large dog mattress. You can find the mattress HERE!
Super fun and easy right?! And, did we mention we only spent about $60 in lumber?
DIY Farmhouse Dog Bed – free plans
You can also follow along in the how-to below!
DIY Farmhouse Dog Bed – headboard sides
The first step is to assemble the “L”‘s. These will be the sides of the headboard. We attached a 1×2 to a 1×4 with wood glue and finish nails. Do this two times.
Attach the headboard slats to the back of the “L” pieces with 1 1/4″ finish nails and wood glue.
Flip the headboard over. Measure and cut the top trim to size. Attach it to the top of the headboard with 1 1/4″ finish nails and wood glue.
Measure and cut the diagonal trim pieces to size. Center them on the top of the headboard and attach with 1 1/4″ finish nails and wood glue.
Attach a cleat to a side piece with 1 1/4″ finish nails and wood glue. The headboard end should be flush. Do this for both sides.
DIY Farmhouse Dog Bed – cleat assembly tip
Note: These cleat assemblies should be mirror images of each other.
Attach the foot board piece to the end of the side pieces. Use 1 1/4″ finish nails and wood glue.
Attach the mattress slats to the cleats with 1 1/4″ finish nails and wood glue. The end pieces should be flush and you can space the rest out evenly.
Attach the end and side trim pieces with 1 1/4″ finish nails and wood glue. The inside of the trim pieces should be flush with the inside of the bed frame.
Finally, attach the headboard to the back of the platform bed frame with 2 1/2″ finish nails and wood glue.
DIY Farmhouse Dog Bed – stain it
You can find the dog mattress HERE. We bought the large in grey and it’s 15% off right now!
Hoss loves his new DIY Farmhouse Dog Bed so much! I wish I had thought of this idea sooner 😉
Don’t forget to check out the how-to video HERE and click SUBSCRIBE to our Youtube Channel so you don’t miss a video!