Hey there! We are already at day 9 in our 12 Days of Christmas Series and I have a really fun and easy DIY Christmas Gift to share with you today!
We love a good wine bottle holder and we have created a few hanging versions in the past! I thought this Table Top Wine Holder was in order 😉
I created this one with scraps but if you don’t have scraps, it will still be super inexpensive to make your own!
Here’s how I did it!
I started with a 1×12 that I cut at 11 1/4″ and marked a diagonal line from one corner to another.
Then, I used my 18V Jigsaw to cut along the line creating two triangle pieces.
Next, I cut two 1×4 boards at 19 1/2″ and cut one end of one of the boards at a 45°.
Here are the three pieces you need for the holder.
Now, drill three 1 1/4″ pocket holes on one of the 90° sides and then on the diagonal side.
You can see where I drilled the pocket holes in the picture above.
Next, I used a 1 3/8″ Forstner Bit
and drilled three holes in the mitered 1×4 board. I started on the end with the miter cut and drilled a hole at 4 1/2″, 10 1/2″ and 16 1/2″.
Before I assembled it, I applied one coat of Rust-Oleum Dark Walnut stain on all of the pieces. I just wiped it on with a clean cloth, waited 5 minutes then blended the stain with a new clean cloth.
Now to assembled! I attached the triangle piece to the other 1×4 (the one without the holes) with 1 1/4″ pocket hole screws. I placed it 3.5″ from the end.
Next, I attached the remaining 1×4, the same way.
The back of the triangle piece should be flush with one side of the 1×4’s.
Finally, I roughed it up a bit with my Corner Cat Sander with an 80-grit pad!
That’s it! Just add your favorite bottles of wine and it makes a great table topper 🙂
This one’s for me but I may have to throw one together for a gift exchange! Want to make one for yourself? Do you have someone in mind that would LOVE it?
Make sure to check out all of our friends Day 9 projects!
Now for the giveaway!!! THREE lucky readers will receive both of these goodies! *Thank you for participating! The winners have been contacted.*
One Kreg DIY Kit
AND one K4 Master System!!!!! Just follow the instructions in the box below to get entered 🙂 Good luck!
I would build a laundry sorted and a kitchen hutch!
I would build the laundry sorter
I enter every single time!!!! Momma needs a Kreg Jig so I can make about 15 shanty-2-chic projects!!! Lol!! Bring it on!!! Building a bed for my son and I want a country kitchen table folks 😉 Bought a corner kat today for the ornament centerpiece from you ladies!
I love this wine bottle holder! So super cute, and super chic 🙂
I think I would make one of these for each of the ladies in our wine group, totally need the kreg jig though. The first project with the Kreg jig would have to be the hall tree that you have on here. I LOVE IT!!
We bought a fixer upper this year—Now that we finally got the painting completed, I would love a kreg jig to get started on all of the furniture I plan to make from your awesome tutorials 🙂
My next project is a dresser for my son’s room. The Kreg System would be so helpful!
Want to build doll beds!
I want to build your floating shelves and farm table.
If I won, I would make the table and benches, bed and night stands, and just about anything else I could afford to make and save for when I move hopefully soon!
I SO want all the kreg additionals (I just have the basic jig), I would build new furniture and stuff for my new house!
Want to make that blanket ladder so badly! Would love to win!
I love your projects and the tutorials are great! I can’t wait to build a dining room table.
I love love love this! Well, and pretty much everything you do. I have a bug to get my own work space set up and stocked with all the necessary tools so I can build build build.
We’ll finally start on all of the projects we have been putting off! Starting with this for a gift exchange 🙂
With the Kreg Jig and tools I will have no more excuses to continue putting off my son’s bookcase build!!!