Kitchen Island Inspired by Pottery Barn!

Woohoo!  It’s Friday!  My kids survived their first week back to school and I got a ton of things done.

So pumped to share my latest Pottery Barn knockoff with you guys today!

Check out my $85 Kitchen Island!

Kitchen Island

Kitchen Island DIY

Isn’t it pretty?!  I think it adds so much to my kitchen and breaks it up a bit.  I have always wanted an island, but opted to not have one for space reasons when I built the house.  By creating one myself, I now have the option of using it, or rolling it into the garage if I feel like it will be in the way.  LOVE the versatility!

I am going to share some of my tips an tricks with you here, and be sure to check out the full set of free plans over with my sweet friend Ana White!  We teamed up to design this one together, and she has provided you guys with some great plans as always!

First tip…

I would not tackle this build without a Kreg Jig!

Guys… We have been telling you for YEARS.  It is time to invest!  It really is such a cheap tool for all the greatness it brings to your projects.  And for those of you that still have yours hiding in it’s box… It’s time to dust it off and get busy!  HERE
is the model that Ash and I currently use!

Ash and I shared a quick video on the Kreg Jig HERE.  We really tried to explain what the heck it is and how we use it… In basic terms 😉

So for the majority of this build, I used 1.5″ pocket holes and 2.5″ pocket hole screws.

Kreg Jig

Here is where I put all of my pocket holes for the ‘X’ Legs…

pocket holes on island


Now for the X legs I placed the wood at this angle to get the pocket holes that would attach to the frame…

angled cut on kreg jig

And this is a terrible shot, but I totally forgot to take a picture of the X alone… Dang it.  I hate when I mess up like that.  But, you can see in the background where all of the pocket holes go!


My sides were a bit tricky because my 1×12 was so not straight.  I was so annoyed by it… If I could have done it again, I would have bought Purebond Plywood and have them rip it down to a 1×12… It would have been much easier to work with and perfect for this project!

THis is how I attached the 1×12.  I used one pocket hole on the side of the top like this.  This is a 3/4″ pocket hole, and  1.5″ pocket hole screw.  I also used 2 wood screws at the top into the side piece as you can see.

island how to

And the bottom…


These are 3/4″ pocket holes, but I used 2 1/2″ pocket hole screws into those 2×4 bases.

This is the project panel I used on the top.  I found this at Lowe’s, but they did not have the exact size I needed.  I did have to use my saw to cut off 4″ from the 24″ side.

project panel

To attach the base pieces I used my Ryobi AirStrike battery nailer.  I LOVE this thing.  Coolest tool in my garage at the moment…

Ryobi AirStrike Battery Nailer

how to build a kitchen island

I just ran some Gorilla Wood Glue under each piece and nailed it down… Easy!

For my finish I used one of my very favorite methods!

I used Rust-Oleum Ultimate Wood Stain in Early American.


Once it was totally dry, I just used one of my favorite tools to sand it down.  This part is SO easy.  Actually it’t almost therapeutic with the Corner Cat.  Add this tool to your list guys… It shares the same powerful 18V Lith-Ion battery that our drill uses and weighs very little.  I use this on every wood project I do now… Love.  I sanded some areas more than others to give it a worn and unfinished look.

Ryobi Corner Cat Sander

For my hardware I used these great hooks I found on a board at HomeGoods.  I paid $15 for the board which had 4 hooks on it… LOVE!  I just unscrewed them and put them on the island!


I used 4 casters I found at Lowe’s on the base.  I would recommend locking casters on your cart if you have kiddos like mine and don’t want this baby being used as a vehicle around your home 😉  Just a tip!

Here are a few more shots!

Kitchen Island

Kitchen Island DIY

Hope you LOVE it as much as I do!

Remember to check out the full set of plans over at Ana White’s amazing site!  Let me know if you have any questions at all!

I would LOVE for you to share and PIN this with your peeps below!

Thanks again!



  1. Joni Miller on May 1, 2019 at 9:34 pm

    Love the kitchen island. But I have another question… what is the paint color that your kitchen cabinets are painted?

  2. Anna on April 23, 2018 at 10:26 am

    Can you make me one? I will pay you?

  3. Alan on March 31, 2018 at 2:59 pm

    Hi – I am building this and the 27 5/8 piece for the long piece of the X isn’t right – is that 27 5/8? When I cut mine I’m almost 3-3 1/2 short. I tripled check all the other measurements according to the plans and I’m right on :). Where am I wrong?

    Thanks in advance –

    • Erin on December 26, 2018 at 1:41 pm

      I’m in the same boat as you. I also triple checked all the measurements and everything else is bang on except the long X pieces. I thought I was going crazy as no one else has mentioned it.

  4. pinkayalak on September 14, 2016 at 5:43 pm

    I am in the process of making this island. I am confused as to how to use the kreg jig on the 45 degree angle cuts in the cross supports. I couldn’t find a video on you tube to help me. Do you have a video?

  5. Micky Pedersen on August 15, 2016 at 8:30 am

    What are the exact dimensions of your butcherblock? Looks great. I have a 18 x 27″ piece of leftover granite that I was looking to use. This looks like it might work!

  6. Charity Scott on March 4, 2015 at 3:29 pm

    I am really looking forward to doing this in my new kitchen. I had a hard time finding this stain (Early American by Rust-Oleum) in my area so I ordered it online. It came in last week and it’s no where near the right color. It is the exact color and brand on the outside of the can as pictured above. I wonder if the manufacturer changed it. I’m really bummed. Any ideas? Thanks!

  7. Ercyla C Schulz on November 8, 2014 at 10:54 am

    wow…. Really loved it. I am trying to do one for my small kitchen. Have watched a lot of videos. Love this the best. Very nice job. We ladies rock. lol.
    I like the Kreg jig explanation too. I just love this tool. I use it for everything. 🙂

  8. Kaylynn Anne Fredrick on August 29, 2014 at 10:20 am

    Could you make this from pallets? I see a lot of 2×4’s and wondering we could cut cost there in order to buy some of the tools needed.

    • beja on October 10, 2014 at 8:31 am

      Not recommended. Pallets are not food safe, and they can actually be dangerous if used as a food surface.

  9. Hollie on August 6, 2014 at 8:28 am

    What did you use for the top?

  10. Gabriella on April 17, 2014 at 12:00 pm

    I absolutely love this! Quick question- do you finish this with a satin or matte polyurethane, or just leave it as is after staining it? Thanks so much!

  11. Julie on March 15, 2014 at 5:44 pm

    What grit sand paper do you use when your distressing? And did you put any sort of clear coat over the whole thing after staining and distressing?
    It’s beautiful and I’m actually starting mine tomorrow morning. Still unsure on my finish though. Haha can’t decide if I want to stain and distress or paint and distress! Thanks for the beautiful inspiration!

  12. Debbie Howell on October 14, 2013 at 6:56 am

    2 things, do you find things fall off the shelf? Would you recommend putting a little lip on the inside edge of that shelf? And also, could this top be used as a butcher block?

  13. 8sjo on October 6, 2013 at 7:37 pm

    I’m thinking about building this island. I’m wondering if the drawer slides in and out nicely, or if maybe I should consider buying some metal hardware to ensure it is easy to use and glides nicely?

  14. Mamaof2beauts on September 25, 2013 at 12:13 pm

    I love this. Is it bad that I stain things so much, that I can name the color of the stain before I actually read the blog??!!!!

  15. Tanya on September 15, 2013 at 12:28 pm

    LOVE this project, your cabinets and floors are fantastic (is that concrete, it’s fantastic!!) xo

  16. Leah on September 11, 2013 at 10:19 am

    I think several of us are dying to know about your cabinets. If you did paint them, please tell us what color! It’s gorgeous!

  17. Danielle on September 8, 2013 at 1:00 pm

    What color is on your cabinets?

  18. Stephanie Brooks on September 2, 2013 at 10:10 pm

    I was so excited to see these plans on Friday and so I made one of these over the weekend… It’s almost finished.. Did you use any sort of finish like wax or poly on yours or is it just natural wood?

  19. Kelly Macaitis on September 1, 2013 at 3:39 pm

    Love this! I’ve been looking for an easy INEXPENSIVE island tutorial.. ADORE! Can I ask the brand/color of your kitchen cabinets? In the midst of a big kitchen reno & I’m on the hunt for the perfect grey for my cabinets!!

  20. Coral Hooper on September 1, 2013 at 10:39 am

    This is amazing! Love! Going to make one. I also love your kitchen cabinets! Did you paint them or did they come that colour?

  21. Cyndi on August 31, 2013 at 7:08 pm

    I wish I had room for a cart like that! I was immediately drawn to your kitchen floors and the range hood. Can I ask what the flooring is? It almost looks like concrete from the photo. Did you do the range hood yourself? If so, is there a tutorial on it somewhere on your site? I want one of those too 🙂 Thanks!


  22. Rhonda @ home.made. on August 31, 2013 at 7:34 am

    Love your island! I wish I had room for an island – I’d make this!

  23. Christy Lawrence on August 31, 2013 at 7:09 am

    Awesome!! I love this. I’ve been debating an island but some are so big…this is the perfect size. And I love the fact that you can move it out of the way when needed. I was wondering if you have to treat the wood in top with anything ??

  24. Cassie on August 30, 2013 at 10:25 pm

    Love this! Wich we had the room for it now, but am definitely saving for when we move 🙂

    • Shanty2Chic on August 31, 2013 at 5:58 am

      Glad to hear it… Thanks Cassie!

  25. Adriana Hernandez on August 30, 2013 at 4:46 pm

    Amazing as usual!!! 😉 Love how you explain everything on detail for the Kreg Jig!! Got mine last week and feel a little lost. 😉 thank you so much for another great tutorial.

    • Shanty2Chic on August 31, 2013 at 5:59 am

      SO happy you got one! It can be a bit intimidating at first, but I promise you will see how easy it is once you get past that! Let me know if you have any questions 😉

  26. Whitney Bartlett on August 30, 2013 at 3:36 pm

    Do you have a picture of the backside?

    • Shanty2Chic on August 31, 2013 at 5:59 am

      I will add one today… Good call

  27. Mary Ann Guillory on August 30, 2013 at 2:58 pm

    You constantly amaze me!!! AWESOME!!!!!

    • Shanty2Chic on August 31, 2013 at 5:59 am

      Thank you Mary Ann… Made me smile 🙂

  28. Brandi Pifer on August 30, 2013 at 2:15 pm

    Your picture looks like a magazine!!!! I could scream I’m so jealous! We are renting but I can’t wait until we buy so I can turn my home into what I want. You’re so talented and this cart is amazing. Once I get my big girl Kreg Jig I’ll be unstopable 😉

    • Shanty2Chic on August 31, 2013 at 6:00 am

      This made my day Brandi…. Thanks for leaving such a sweet comment! And yeah for BIG GIRL Kreg Jigs :-))

  29. Linda Crandall on August 30, 2013 at 12:38 pm

    Bravo!!! I love it

  30. ChelseaH on August 30, 2013 at 12:15 pm

    I love this! I would love to know how you made the drawer though. Also, when I clicked on the link to Ana White’s site, it asked for user login information and wasn’t a page for your project. When I searched for kitchen plans, your project did not come up at all 🙁

    • ChelseaH on August 30, 2013 at 12:19 pm

      It’s just the link at the bottom that doesn’t go to an active page on AW’s site. When I scrolled to the top, I found the other link, which does go to the right place on her site. Thanks!

      • Bonis on December 2, 2014 at 11:05 am

        This is such a fabulous island!
        Unfortunately neither link works for me. I’m heartbroken! 🙁

    • Shanty2Chic on August 31, 2013 at 6:01 am

      Should be working now 🙂

Leave a Comment