Submitted By: Jessica Morris
Original Shanty2Chic project it was inspired by:
https://www.shanty-2-chic.com/2014/05/restoration-hardware-inspired-dining-table-for-110.html
Project (URL):
http://www.theruggedrooster.com
Time to Complete: 1 Day
Total Cost: 170.00 CA
Finishing Details:
the biggest thing about this table is that you need to have a flat surface to work on. The angles are tricky. Even the slightly bit off and it will put the other angles off.
Continually triple check all your angles!
Once completed we planed the sides & sanded. Then we applied two coats of “classic grey” by Minwax. Let it sit for 24 hours & then lightly distressed the table.
We popped four coats of semi-gloss polyurethane on our table for extra protection from our three kids under 6!