Hey guys! We recently discovered Ana’s blog ~ Knock Off Wood ~ and I have been on a furniture high ever since! Ana is a carpenter who makes knock off furniture on the cheap…and she is generous enough to share her detailed plans with the blogging world! Not only does she offer the plans for FREE, she gives you the exact cutting deminsions, a supply list and detailed how to’s on many techniques she uses when building!
Have you ever looked through a high-end magezine and longed for playroom storage? Well, I haven’t simply because they are so out of my budget, so I glance but I never let it enter my mind but that is about to change! Ana offers the plans for a similar storage system and PLEASE believe me when I say ANYONE can make this ~ NO SAW NEEDED! It may be a little overwhelming for you when you first read the plans so I am going to take you with me on my journey to conquer the largest piece of furniture I have ever made from scratch. I am starting with the outside bases. You can see the plans for it HERE!
When I said NO SAW NEEDED that is because Home Depot will cut all of the measurements you need for FREE!
I took my supply list along with all of the measurements I needed to my local Home Depot.
This is Stephan. I told him what types of wood I needed and how I wanted them cut. He picked them out for me, carried and cut them. I just told him the measurements as he went. (I did get home with a piece that was cut too short. I took it back the next day and they replaced it at no extra charge. However, for the next set I will bring my tape measure with me and make sure they are right before I leave so I don’t have to make another trip).
These suckers spank my circular saw!
and here are all of my pieces (because they were cut I was able to fit them in my backseat and they were very easy to handle)! FYI: I used 3/4″ thick MDF for the sides, bottom and top and 1/4″ thick MDF for the back.
When I got home I marked all of the boards A-E according to the plans (next time I will mark them as I measure them at Home Depot to save time).
Now, you don’t need a saw but you MUST have a drill…
and Gorilla Glue Wood Glue. When attaching the boards together spread wood glue generously between every piece you are attaching ~ the screws will act as clamps while the glue is drying.
You will need to predrill holes for all of your screws. Choose a drill bit that is a tad smaller than the thickness of your screws so that the screws will only cut the thread. (MDF is soft and this will protect the wood from splitting.
Because I could not find the suggested cabinet screws, a Home Depot employee (and my hubby) suggested these Deck Mate screws. I’m not sure what the difference is but they worked like a charm!
After predrilling I inserted the screws. (You will be drilling blind so a line is helpful to mark where the other board is located).
Looking good! (Ana offers a how-to square and level HERE).
Another step ~ per plans!
The plans suggest 2 1/2″ base moulding but I could not find any under 3″. So, I just picked a preprimed trim that I liked at 2 1/2″. It worked great!
Almost done!
Predrilling the top (note the penciled line).
Adding screws to the top.
Now for the back side. Ana suggests 1/4″ thick plywood for the backside because it is cheaper than MDF or hardwood plywood. I opted for 1/4″ MDF because the cubbies will be open, exposing the back. It was more expensive but I know I will be more pleased with the look.
I used these 1″ wire nails to hammer the backside on.
Finally, go back and fill in the holes made by the screws with Elmer’s Wood Filler (this step is important because your piece will look much nicer without screws and holes showing).
This step is also easy! Just squeeze a bit of wood filler in each hole…
then, pack and smooth. If the filler is not flush you can sand it down with a light grit sand paper.
and here we are! Now remember these are just the two bottom bases that go on either side of the TV stand. The total cost for these together was $42. It took me 30 mintues at Home Depot and 45 minutes to build each cabinet. NOT BAD!!! Ana also provides plans to add drawers inside of these cabinets but I am going to wait until the entire system is built before I decide if I will add the drawers. Stop by next week as I try to tackle the media stand that goes between these ginormous bases. I can’t wait!!!
TO BE CONTINUED….
~Ashley
hey..want to make this storage system but cant find it on ana’s blog…can you share measurements with me?
thanks!
Hey Ashley, I just recently completed the project and wanted to share the results. It went relatively smooth, even though your experience with getting the wood cut was 500 times easier than mine (you can read about it on our blog – link provided below).
I had to modify the bookshelves to only go 3 high instead of 4 because of the shape of our bonus room, but other than that I tried to stick to the plan. It was my first project ever, so of course I had to do some "nipping and tucking" here and there to get some of the pieces to fit just right.
Thanks for the inspiration
Oh wow! I just did a google search "Pottery Barn tutorial" to see if I could find any inspiration for our playroom re-do. I can't wait to see what else you have here and to check out her site as well. Great job! I'm really impressed.
I just started the cubby bases today, the lowe's guy who cut mine did a horrible job and everything was off by 1/8" to 1/4". I was able to make adjustment but it took so much time! Got them done and the putty is drying now so I can sand them tonight. Will have to try another store for the hutches and take my tape measure with me. Thanks for the insight and pictures as you go, I might not have tackled the project if I hadn't seen you doing it.
So are you going to paint it? Or stain it?
I am hoping to make this someday in the not so far future! 🙂
I just discovered this blog as well, and I'm in heaven thinking about all the fun projects we can build! Can't wait to see the final result.
I can't wait to see the rest! You are such a TEASE!! I want to do this in my bonus room!
Hey guys. I've had a lot of you say that you wish you had a space to put this huge piece. You can mix and match the pieces to fit any space. For example, 1 drawer base with 1 cubby hutch on top makes a very cute storage piece and it will not take up much room. You can check out Ana's site or Pottery Barn's for more design ideas.
That is going to be gorgeous! I wish we had room in our home to put something like that. Can't wait to see the finished product!!! I'll be checking out Ana's blog. Thanks.
Ashley, you blow me AWAY!!! That is great. I would never in a million years dream that one day you would be building furniture.
Okay girls post something please… We are having Shanty withdrawl. I can't wait to see your finished project Ashley but give us a little something to envy while we wait. For those of us addicted to your site, we are suffering!!!!!!!
FABULOUS! I used to work at Pottery Barn Kids, and although I got a fantastic discount, I just couldn't bring myself to pay $100+ dollars on most of their stuff. I love looking for ideas and recreating myself. I have a small table in the works now and I can't wait to share pictures on my blog soon! :o) If you were to buy that whole storage system it would run you at 1K. Yikes! Love the DYI. Great blog, love you girls!
Bravo! I am really impressed and inspired! I've seen her blog and when I started reading the instructions, I got overwhelmed. I don't have a saw and I don't have a nailgun and I gave up. Obviously, too early!!
Thanks to you for doing this, I'm inspired to pick it up again. I want to do the entryway system. I can't wait to see the end result!
You are a brave (and patient) woman. Kudos to you!!
Loving the directions for free and pre-cut simpleness that Home Depot provides. You girls are the same kinda DIY thrifters that my sisters and I are. Check out our "upcycled" furniture on our little blog, Ethel Edith Junk, Funk, and Furniture. Hope you have a great day!