Learn how to refinish furniture easily with these simple steps and how-to video by Shanty2Chic!
We get so many questions from you guys wondering how we got started building furniture! When we first started Shanty2Chic, we actually didn’t build, we refinished and rehabbed furniture! Whitney and I would dumpster-dive and turn someones trash into our treasure. After fixing broken pieces, sanding and painting, we thought we could try out hand at building and that’s how it all began! This project brings me back to our beginning! My oldest son asked me if I would refinish some furniture that he had inherited. It is very sentimental to him and of course I said YES! He dropped it off for me and I got to work! There are so many ways to refinish furniture but I thought it would be helpful to show you all how we do it!
Just click play in the box below to watch me refinish this dresser!
So easy and what a transformation! Check out the step-by-step process below!
How to Refinish Furniture
Step 1: Prep
I started by sanding the entire piece with an 80-grit sanding pad.
Once I got the initial layer off, I followed with a 120-grit.
Finally, to smooth everything out, I followed with a 220-grit.
There was a ton of paint on this dresser. I wasn’t able to sand it completely off but I gave it a good enough sanding so that it was smooth and it would give the new paint something to stick to.
After sanding the dresser, I moved on to the drawers. I removed the original knobs because my son asked for new hardware. This made sanding the drawers super easy.
Once I finished the sanding process, I used a damp cloth to wipe all of the residue off the dresser and the drawers.
Step 2: Paint
Now for the paint. I chose a favorite, Tricorn Black by Sherwin Williams in a satin finish. Because this paint was darker than the original paint color, there was no need to prime.
I used a foam roller to roll on about 2 1/2 coats of paint on the dresser and the drawers.
When the paint dried, I put the drawers back in the dresser and moved on to the hardware!
Step 3: Hardware
The new hardware that I picked for the dresser had two widespread holes so I used our favorite wood filler to fill the original knob holes. I used a putty knife to wipe it over the holes.
Before the wood filler dried, I used a damp cloth to clean up the excess filler.
Once the wood filler dried, I measured and drilled for the new hardware.
The screws that came with the hardware weren’t long enough to fit through the drawer faces. When this happens, rather than running to the store for longer screws, I use a paddle bit to bore out some of the hole on the inside of the drawer.
I installed the new hardware and that was it! I found this hardware at Hobby Lobby and bought them when they were 40% off!
Here she is before…
And here she is after!
My son loves his new dresser and plans to use it as a TV stand! I love that he asked me to do this for him and I can’t wait to refinish the rest of the pieces he dropped off!