One of our top questions we receive on an almost daily basis is… How do I paint my kitchen cabinets?  There are a ton of ways to paint cabinetry, as well as a ton of products.  We have recently found lots of success using this method here!  Come check out how we gave our sister’s cabinets a whole new life with a few cans of paint! Just click Play in the box below to watch!

Paint Kitchen Cabinet

This really is such a simple process.  The first thing we did was remove all of the cabinet doors.

Next, we used a degreaser over the surface of all doors and faces and frames.  This is the degreaser we used HERE!

HERE is a link to the paint we used.  The color we chose to use for our sister’s cabinets is called Platinum Ring.

HERE is a link to the larger brush we used for the larger surfaces, and HERE is a link to the smaller detail brushes we used in corners and smaller spaces.

We started with our doors first.  NOTE – Make sure to label doors as you remove them.  This will keep you from getting them mixed up after you finish up.  We painted the outside of each door first.  Be sure to watch the video to see our little tip that makes a huge difference when applying the paint!

Then, we worked our way in and painted the insides.  Make sure to let the first coat dry before going to the second.  This stuff dries quick!

Once all of our doors were dry, we started working on the cabinets themselves.  You can remove drawers entirely and set them on their ends to paint, but we just pulled each one a few inches out and painted them in place.  We were in a hurry 😉

We taped off the floors and countertops first, and then started applying the paint using the same trick where we dip the brush in a tiny bit of water before applying.

Once everything was dry, we applied the next coats.  The second coat is basically a repeat of the first one, and the third coat covers any brush strokes or imperfections you may see.  It’s a much faster coat.

We let everything dry at that point and then gave it all a coat of Polycrylic.  You can see the one we used HERE!  THIS IS A MUST!  You need to put a finish on chalk paint because it is water soluble, and water happens in a kitchen.  Your paint will start removing over time without a good top coat.

So, now let’s take a walk down memory lane!  This is always the fun part!

Builder-grade BLAH before…

To AMAZING!

It seriously is crazy how much change you can create in your space with just the paint alone!  Here are links to everything else you see!

Link to the drawer pulls HERE

Link to the rug HERE

Check out the other projects that we did in this ShantyHouseCrash

Farmhouse Dining Table – Free plans and how-to video live, now!

DIY Driftwood Backsplash – Free plans and how-to video live, now!

How to Add Height to Kitchen Cabinets – Free Plans and how-to video live, now!

Custom Cabinet Trim Hack – Free Plans and how-to video live, now!

How We Paint Cabinets –Free Plans and how-to video live, now!

How to Frame and Cover a Crescent Window – Free Plans and how-to video live, now!

DIY Round Kitchen Table – Free plans and how-to video live, now!

DIY Pipe Shelves – Free plans and how-to video live, now!

Ashley and Whitney Blog post signature
Become a VIP Insider
Stay up-to-date on all the new project, free plans and new products available for you!

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

31 Comments

  1. I would be so scared to paint my own home. I would have to start on some practice furniture or something. lol. Reading your article though I think will make the whole process a little bit easier. Are there different qualities of paint that you can use? Are more expensive paints better to use? Thanks for the article!

    1. Hi. Great tutorial! Thank you SO much! 3 questions for you:
      1. How many quarts of paint did you use for this project?

      2. Do I need to be concerned about yellowing if I use the sealer on white paint?

      3. So you know if my local store can add color to the Kilz chalk paint?

      Thanks again!

  2. How long did you have to wait between coats of paint? And before you apply the poly? Did you use the same brush for the poly?

  3. It looks like you guys painted the walls as well. They were more beige before. What color did you end up using on the walls? Thank you!

    1. I’m not sure how old this post is but I really like what you did. Does this work on unfinished cabinets???