SIGN UP TO BECOME A VIP!

DIY Modern Farmhouse Dining Table – The Leasha Table

Hey friends!  We teamed up with Enterprise on today’s awesome build!  We rented a truck and drove to our sister’s new house in Houston to fix it up for her!  We had so much fun!  We built her a TON of stuff, but our favorite project has to be this awesome DIY modern farmhouse dining table that we call the Leasha Table!  Before we get started, be sure to check out our YouTube video on it HERE or below!

Look how cute this table turned out!  WE LOVE IT!  Before we get started, you can download and print the FREE PLANS by clicking HERE!

DIY Modern Farmhouse Dining Table

MY LATEST VIDEOS

DIY Modern Farmhouse Dining Table – Free Plans

The first step to building this table is creating the table top. These are 2×6 boards that we ripped down to 5”. We added 1.5” pocket hole screws down one long side of all but 1 of our plank boards, and also at the ends of each plank board. We attached the plank boards together first using 2.5” pocket hole screws. Once all plank boards are attached, line of the boards on each end and mark the exact measurement of the breadboards. Attach the breadboards using 2.5” pocket hole screws.

DIY Modern Farmhouse Dining Table

DIY Modern Farmhouse Dining Table – The Legs

Now it’s time to build the legs of this table. The center of these legs are also 2×6 boards that we ripped to 5”. You will create two identical leg assemblies. Start by cutting the 3 leg base pieces and attach or laminate them using lots of wood glue and nails. You can use clamps to hold them tight in place until the glue dries. We like to let these set overnight, but you don’t have to!

DIY Modern Farmhouse Dining Table – The Legs

Now we are adding the feet to the legs. These are also 2×6 boards ripped to 5”. It helps to use a 1/4” spacer to hold the legs in place while you attach them. We attached the 2×6 boards using wood glue and 2.5” Spax screws. Mark center of each foot piece before attaching to make sure you have everthing evenly placed.

On one end of each leg assembly, attach the 1×6 foot board. These are cut at a 30 degree angle on each end. Because this is a 5.5” board, you will have a 1/4” overhang on each side again. It does help to prop the leg assembly up on a 1/4” spacer or scrap to hold it in place. Make sure you also center the 1×6 board on with the 2×6 foot board, and attach it using wood glue and 2.5” Spax screws.

 

Time for foot pads! These are just square blocks we cut from the 1×6 board that will hold the table off the ground. We attached each foot pad flush with the end of the longer 1×6 board with wood glue and 1.5” Spax or wood screws.

DIY Modern Farmhouse Dining Table – Diagonal Pieces

Next cut and attach the diagonal pieces. These are 2×4 boards that we ripped to 3”. The easiest way to get this measurement is to hold it up in place and mark your cuts. Attach each diagonal piece using wood glue and 1.5” nails.

DIY Modern Farmhouse Dining Table

It’s time to attach each leg assembly. Cut the runner to size and add 1.5” pocket holes to each end. Attach the runner to the center and flush with the top of each leg assembly. Use wood glue and 2.5” pocket hole screws to attach the runner.

DIY Modern Farmhouse Dining Table

DIY Modern Farmhouse Dining Table – Attach the Base

Final step is attaching the base of the table to the table top. See the measurements to know where to line it up. Attach the base to the top using 2.5” Spax or wood screws through the runner and top 2×6 boards and into the table top. Don’t use glue on this part so that you are able to get the table in and out of the room easily.

DIY Modern Farmhouse Dining Table

Table is done! You can paint or stain yours. Check out our website to see how we finished ours. Make sure to share your builds with us on social media and use hashtag #shanty2chic!

 

DIY Modern Farmhouse Dining Table

Here are links to all the goodies in the pic!

Finish for tabletop click HERE

Paint for base of table click HERE

Rug under table click HERE

Window panels click HERE

Dining Chairs click HERE

Table Runner click HERE

Centerpiece Vase Click HERE

 

As we mentioned, this awesome project was sponsored by Enterprise!  We LOVED working with them!  Our opinions, words and experience was entirely our own!

More Posts Like This One

9 Comments

  1. Amanda Osma on October 1, 2018 at 11:50 am

    In the plans there’s no 1×6 under the table top but in the video there is. I made this table without the 1×6 and it rocked and was pretty unstable I wonder if the 1×6 helps with this

  2. tam on September 10, 2018 at 9:07 pm

    where are the dimensions on the cut list? Did I miss it somewhere on the plans. I purchased the wood and when I was ready to cut, they weren’t were they usually were. Please advise.

  3. Jay Bogle on July 15, 2018 at 12:01 pm

    I love all of your projects and the fact that the downloadable plans are so easy to follow. The color coding is great for someone like myself trying to learn to build these pieces. Great work ladies and thank you!

  4. Laurie Gehrt on July 12, 2018 at 8:13 am

    What would I need to do to extend the size to 10″ long?

  5. Karina Brown on July 9, 2018 at 11:42 pm

    Where did you buy the chandelier?

  6. Nicole McIntyre on July 9, 2018 at 10:03 am

    I’m new to nailers, but eager to learn. What size nails did you use to laminate the leg bases?

  7. shelley wilson on June 29, 2018 at 1:14 am

    Can you build a banquette?

  8. Gary Kohl on June 28, 2018 at 5:31 am

    My concern always with ax breadboard table is the breadboard end itself. Most people lift tables from the ends. I am concerned that the breadboards are not secure enough to support the weight of the table when the table is lifted but them.

  9. Lindsey Carlton on June 27, 2018 at 2:17 pm

    I would love to see this table done as a 60″ round table!

Leave a Comment